Have a look at this steel guitar!

David Hartley · Posted 28 Dec 2008 11:14 pm

I gave a lesson to a guy locally last week. He is VERY tall and we had to tilt the Rains forward by 2" for his legs to fit under.. In the meantime, he went home and wanted something to practice on and built this!

His email read "There must be some way of adapting a pedal steel to fit me. The standard Rains seemed ok if it had a platform or something supporting it level.
Would three pedals be enough to start with? They seem very complicated with all those levers and things. Meanwhile I have built my own just to practice the scales on (see pics). It actually works, but only has four strings and two pedals so far, as I ran out of half-inch pulleys. At least it has lots of leg room. Watch out, Rains!

All the best,
John

David Hartley

Brian Kurlychek · From: Maine, USA

wierdest guitar evar. cool.
_________________
We live to play another day.

Peer Desmense · From: Netherlands

I used to play with that stuff when I was a kid.
We called it MECANO and you could play with it the whole day long. Along with LEGO of course.
Now I wonder wether this has anything to do with the fact that I became steel player.
Did most of us play with construction toys when we were kids... Rolling Eyes

Peer

Paddy Long · From: Christchurch, New Zealand

Thats one those new "Mechanommons" push pulls we have all heard about !!! Whoa!

_________________
14'Zumsteel Hybrid D10 9+9
08'Zumsteel Hybrid D10 9+9
94' Franklin Stereo D10 9+8
Telonics, Peterson, Steelers Choice, Benado, Lexicon, Red Dirt Cases.

Cartwright Thompson · Posted 29 Dec 2008 2:02 am

I've read in another thread that these guitars tend to be 'clanky', does this one have that problem?

Bill Hatcher · From: Atlanta Ga. USA

Roger Rettig · From: Naples, FL

Meccano!!!! Great stuff, and I'd eagerly await Christmas and birthdays, because I'd get the supplement set that would upgrade my existing one (6A would turn your #6 into a #7, etc). It was a marvelous toy, and made in Liverpool by Hornby who also made great toy trains! I still have a couple of bits and pieces, including the instruction manual. This would have an impossibly-optimistic picture on the front of a proud dad watching his boys complete a massive facsimile of either Tower Bridge or a giant blocksetting crane - it was the same picture even if you only had Set #1, the components of which would just about run to a tiny wheelbarrow.... Crying or Very sad

I guess toys are still educational, but these kind of hands-on products have been replaced with micro-chips. Appropriate to our age, but not as appealing to an old codger like me!

That's a great effort - I never thought of making steel guitar with mine!

PS: Bill: I imagine that Meccano was very similar to the Erector Set, and was the European equivalent.
_________________
Roger Rettig: Emmons D10, B-bender Teles, Martins, and a Gibson Super 400!
----------------------------------

John Billings · From: Ohio, USA

Bill, I had Lincoln Logs and Plastic Blocks. I must be even older than you!

Gordy Hall · From: Fairfax, CA.

Is that a 'Franklinstein'?

What's the co-pedant? Rolling Eyes

_________________
Dekley S-10, tangled fingers and feet

Dave Mudgett · From: Central Pennsylvania and Gallatin, Tennessee

Yup, looks almost identical to my Erector Sets growing up. I made all kinds of stuff, but never a guitar. A.C. Gilbert, the company that made Erector Sets, went out of business in the 1960s, but the torch was carried on. Current versions are made by - you guessed it - Meccano of France, which is apparently part of Nikko of Japan. Basic info here - http://en.wikipedia.org/wiki/Erector_set . Even though these are still made, I haven't seen one of these in the hands of a kid in the US for at least 40 years. I wanted to get one for my daughter, and I got evil looks from everyone around me. Shoulda' done it anyway.

I'm all for chips, bits, bytes, and computers - but I think at a young age, there's nothing so fascinating as mechanical contraptions. They're more tactile and easier to grok what's happening. I have no doubt that this early experience made it easier for me to do the math, science, and engineering thing. As a society, we pay lip service about wanting more math and science for our students, especially women and minority students. Stick one of these in everybody's hands in kindergarten and first grade, turn them loose with some fun projects to work on, and make it look cool - it'll happen on its own, IMO. But it seems that we only want to talk about this.

C Dixon · From: Duluth, GA USA

Would it be appropos (or no) to say that tinkertoy is the guitar that all others will be measured by in the years to come?

What's that?

Hmmmmmmmmm

You say, "NO way!!!"

Aw shucks!

Laughing

c.
_________________
A broken heart + † = a new heart.

David Hartley · Posted 29 Dec 2008 2:08 pm **John Said............**

Can you tell Peer Desmense (on the forum) that I tried making a LEGO one, but it collapsed om me!
Maybe someone out there has some spare Meccano pullies! Also it has the advantage that when I get bored with it I can make a dockyard crane or something.

John T

Daniel Eaton · From: Weare , NH , USA

Yup, I had one of those "educational} erector sets back in the 50's.I was a pretty slow learner even then. Can't begin to say how many times I got my fingers caught in the motor. Still the best gift that I ever got for X-Mas. The DoRite folks of to-day wouldn't blinke twice to out law one of those to-day. I might chock on my finger after I got it caught in the motor.
_________________
Sho-Bud D10 With 8 & 4
Peavey Reno

Peer Desmense · From: Netherlands

Paul Redmond · From: Illinois, USA

Dave M. you're right on again!!! Today's teen-agers don't know what a spark plug is let alone how to check the gap on a new one and replace the old one...not because they couldn't do it...because they don't know that there are such things under the hood...what's a hood?
Had Lincoln logs when they were still made of "pressed wood"...they'd swell up in the summertime and didn't always go together as planned.
Had two Erector sets...never did find out where they went...parent's divorce left many "voids" in my life, if you know what I mean.
Still have the American Flyer train set though...since 1951...still runs fine and is still intact, transformer and all.
Those were wonderful days...kids today will never experience this.
BTW what's the cabinet drop on that steel?
PRR

John De Maille · From: On a Mountain in Upstate Halcottsville, N.Y.

Paul,
Sorry for being off topic, but, I had an American Flyer layout that filled the attic in my house, about 20'x40'. My current HO layout pales by comparison. God, I miss those days!

Randal Smith · From: Nashville, TN, USA

Ray McCarthy · From: New Hampshire, USA

Forget the guitar--this guy means business!!!

Keith White · From: Norfolk, UK

Yep certainly differant, Put a starting handle and a magneto in there someware and watch the sparks flow. Keith White UK.
_________________
Sho-Bud 'LDG', Sho-Bud 'The Professional', Rains SD10, Fessenden D10, Hilton Pedal, Peavey Session 500, Peavey 112, Lots of PV PA, And of course, the BJS Bar (for the best tone)! Love all Steel Guitars!

Tommy Shown · From: Denham Springs, La.

Hey guys,
Improvise, adapt, and overcome. As my dad would say to me when I was younger, "Boy, for everthing and anything there is a way ". That's some serious enginutyu there.

Glen Derksen · From: Alberta, Canada

Christmas of 1967 or 1968, my brother got a Mechanno set. I'm not sure how much that had to do with it, but he turned out to be a very talented mechanic...he just never took it up as a trade. I'm sure he could be a good pedal steel tech if he put his hand to it.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic