| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic nv112 problem
Reply to topic
Author Topic:  nv112 problem
Mike Bowles


From:
Princeton, West Virginia, USA
Post  Posted 17 Dec 2008 8:14 pm    
Reply with quote

my nv112 starts humming with nothing hooked to it i can turn it off and back on it quits sometime then starts back im not sure if its still under warranty or not sent bobbe seymour email to try to find out i cant find my papers thanks for any help
_________________
Mike Bowles
View user's profile Send private message Send e-mail Yahoo Messenger
Mike Brown

 

From:
Meridian, Mississippi USA
Post  Posted 18 Dec 2008 6:28 am     Hummmmmm......
Reply with quote

If you are the original owner, your N'Ville 112 should still be under warranty as it carries 5 year limited warranty. Take it to the nearest authorized Peavey Service Center or sent the chassis and reverb to me here at Peavey and we will repair it for you. Our address is;
Peavey Service Center
Attn; Mike Brown
412 Hwy. 80 East
Meridian, MS 39301
Please include a copy of this post when you send the chassis and your daytime phone number.

Mike Brown
Peavey USA
View user's profile Send private message
Mike Bowles


From:
Princeton, West Virginia, USA
Post  Posted 18 Dec 2008 6:54 am     nv112
Reply with quote

thanks mike i am the original owner i bought this amp from bobbe seymour i will try to get this to you in a day or so thanks again
_________________
Mike Bowles
View user's profile Send private message Send e-mail Yahoo Messenger
Wayne Franco

 

From:
silverdale, WA. USA
Post  Posted 19 Dec 2008 12:09 am     I messed my 112 up all by myself
Reply with quote

Sent it to the factory. Better than new. It always had a hum to it the others didn't have. It doesn't now and I really like this amp. Ken Fox said it was cheeper to send it to the factory for repair. I believe it. They did it very reasonably.
View user's profile Send private message Send e-mail
Jack Stoner


From:
Kansas City, MO
Post  Posted 19 Dec 2008 3:17 am    
Reply with quote

Turn the reverb to zero (off) and see if you still get the hum. My NV112 has a bad reverb hum (more reverb hum than my NV1000) but as I use a POD XT for reverb and delay it's not a problem.
View user's profile Send private message Send e-mail
Mike Bowles


From:
Princeton, West Virginia, USA
Post  Posted 19 Dec 2008 9:01 am     Nv112
Reply with quote

JACK I HAVE TRIED IT WITH THE REVERB OFF IT STILL HAS THIS PROBLEM MY NV 1000 HAS A PROBLEM WITH THE REVERB THE MORE I TURN IT UP THE LOUDER IT HUMS
_________________
Mike Bowles
View user's profile Send private message Send e-mail Yahoo Messenger
Ron Wright


From:
Modesto,CA
Post  Posted 19 Dec 2008 10:49 am    
Reply with quote

my brand new NV112 has the same reverb hum when turned to anything past 4
_________________
MSA S12 Classic XL 5/5
NV 112
NV400
Peavey Special 130
Ovation
Gibson 330
boss DD3,DS-1,TU-2,PS-2,Behringer rotary rm600
Goodrich 120,BoBro,RV2,Hilton Vp, Steeldriver3
View user's profile Send private message Send e-mail Visit poster's website
Jack Stoner


From:
Kansas City, MO
Post  Posted 20 Dec 2008 11:57 am    
Reply with quote

Ron, exactly like both my NV112 and NV1000, but as I mentioned I don't use the reverb in my amps, I use the reverb in my POD XT.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron