| Author |
Topic: Peavey Bandit 112 Transtube |
Alan Rudd
From:
Ardmore, Oklahoma
|
Posted 7 Dec 2008 6:34 pm |
|
| I've got a Bandit 112 that only works when I plug into the return jack. Neither input works, except that you can barely get some sound, hardly enough to hear it in the speaker. Any idea what's wrong? |
|
|
 |
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 8 Dec 2008 6:40 am Bandit
|
|
| Could possibly be a broken connection at the input jack. |
|
|
|
Steve English
From:
Baja, Arizona
|
Posted 8 Dec 2008 7:16 am
|
|
Another thing to try:
Plug a guitar cable from the send to the return jack.
Sometimes the "normally closed" jacks on the send will get a little funky after not being used over time. Exercising the jack by inserting and removing the plug several times can restore the connection.
Cool little amps! I've got one. 
_________________
Always remember you're unique..... Just like everyone else |
|
|
|
Stephen Winters
From:
Scobey, Mississippi, USA
|
Posted 8 Dec 2008 8:45 am
|
|
Like Steve said,
Put a short cable from your send to your return jack...then plug your guitar into one of the input jacks.
I have one of these amps, and this has worked for me. If you have those send/return jacks replaced it will fix the problem. But using a cable is cheaper.
_________________
Stephen Winters
ZumSteel, Sho-Bud Pro1
Peavey Nashville 112 |
|
|
|
Alan Rudd
From:
Ardmore, Oklahoma
|
Posted 9 Dec 2008 12:43 pm
|
|
| No, It got loud as hell for a second. I pushed the effects level and resonance buttons in and out and they were scratchy. It would work for a second and then go out again. |
|
|
|
Tony Prior
From:
Charlotte NC
|
Posted 9 Dec 2008 1:09 pm
|
|
I'm not familiar with this model but I am familiar with this Peavey issue. Take the chassis out of the cabinet , go get some Radio Shack or other brand contact cleaner. Really clean all the plugs and connections, inputs, out's, effect sends etc, I mean really clean them. If there is a reverb connector don't forget that one too, both ends.
When cleaning the input/send jacks use a 1/4 male plug in and out to make sure the cleaner is getting in there , especially those double jacks with two center positions. If you can get a soft small brush use that as well.
The volume worked for a few seconds, thats a great indicator, this issue is fairly common with older Peavey amps, Nashvlle 400's and such.
I generally clean my N400 once a year regardless of whether it needs it or not. It's routine now.
good luck
tp |
|
|
|
Alan Rudd
From:
Ardmore, Oklahoma
|
Posted 9 Dec 2008 2:09 pm
|
|
| Works fine as long as I hold the effects level button in, but I'm having a hard time playing the guitar while holding the button! |
|
|
|
Tony Prior
From:
Charlotte NC
|
Posted 9 Dec 2008 2:11 pm
|
|
Can't your wife hold the effects level button in for you ? 
Ahh..take it apart and clean all the pots and buttons too, this one is clearly dirty. I forgot to mention that above,
tp |
|
|
|
Alan Rudd
From:
Ardmore, Oklahoma
|
Posted 10 Dec 2008 12:46 pm
|
|
| She would just say, "It's too loud!" so I don't think that option will work! |
|
|
|
Alan Rudd
From:
Ardmore, Oklahoma
|
Posted 10 Dec 2008 8:50 pm
|
|
| I have just been messing with the buttons and by gosh, it's working! At least, right now it is! |
|
|
|
Nick Reed
From:
Russellville, KY USA
|
Posted 11 Dec 2008 10:34 am
|
|
| Kudos to Alan |
|
|
|
Alan Rudd
From:
Ardmore, Oklahoma
|
Posted 29 Dec 2008 5:32 am
|
|
| Still having problems. Seems to be in the effects button near the loop. Cleaned all inputs. It works as long as I'm holding the button in and I have the loop connected. |
|
|
|
