Author |
Topic: AB, Pots, |
Lewis John Foote
From: Dorset, UK
|
Posted 4 Dec 2008 4:51 am
|
|
howdy, i found on a job we were workin on, 6,AB,5K-OHM,TYPE J, MEXICO, THERE NOT BEAT ABOUT, how can i tel if there any good without loading them in a pedal,there quite long shafted, longer than the ones in my VP,s lew. _________________ pro1,s two round fronts, one square front, sho-bud, S12, LDG,1977, built by paul franklin sen, [THE PROFESSIONAL]nice all original, bandit65, nash, 400, profex 11,match-box, 7A,DD3, delay,various accoustic guitars, amps, and other necessitys, |
|
|
|
Steve English
From: Baja, Arizona
|
Posted 4 Dec 2008 6:22 am
|
|
Lew,
All my pots are 500K ohm. I couldn't tell you how a 5k would work...
I have successfully cut down the long shafts, but use caution not to stress the internal contacts while cutting.
If you have an instrument that will put out a continuous tone,such as a keyboard flute sound, run that through the pots and sweep from full off to full on to check for any obvious scratching noises or dead spots. _________________ Always remember you're unique..... Just like everyone else |
|
|
|
Donny Hinson
From: Glen Burnie, Md. U.S.A.
|
Posted 4 Dec 2008 5:59 pm
|
|
No, your 5k pots would be of no use as a volume control. Pots used for volume controls are usually 250k to 500k.
Quote: |
I have successfully cut down the long shafts, but use caution not to stress the internal contacts while cutting. |
When cutting off part of the shaft, always have the portion you're cutting off either held in a vise, or held by pliers. NEVER hold the body of a pot using a vise or pliers when you're cutting off the shaft! |
|
|
|
John Bechtel
From: Nashville, Tennessee, R.I.P.
|
Posted 9 Dec 2008 12:12 am
|
|
There was a topic here last week by Frank Parish more or less concerning the same problem. He accidently bought Pots from a local electronics shop that were 5K instead of 500K and he found he only had barely half his normal volume! He brought them to me and I missed the difference on the invoice too! _________________ <marquee> Go~Daddy~Go, (No), Go, It's your Break Time</marquee> L8R, jb
My T-10 Remington Steelmaster |
|
|
|
Lewis John Foote
From: Dorset, UK
|
Posted 9 Dec 2008 5:06 am
|
|
howdy, when i saw them i thought 5k was maybe,short for 500k, but i can see now there worth less as a volume pot, thanks for all comments, lew. _________________ pro1,s two round fronts, one square front, sho-bud, S12, LDG,1977, built by paul franklin sen, [THE PROFESSIONAL]nice all original, bandit65, nash, 400, profex 11,match-box, 7A,DD3, delay,various accoustic guitars, amps, and other necessitys, |
|
|
|