Author |
Topic: Make Custom Rhythm Tracks |
Hal Higgins
From: Denham Springs, LA
|
Posted 9 Jan 2003 12:45 pm
|
|
I've started a new service for steel guitarists, vocalists, etc. That being making custom rhythm tracks. All digitally done using a HDD recorder (hard disk digital). Will master to either a mini-disk or cd (your choice). You name the song and key that you need the tracks in. I specialize in country and gospel (southern). If you want vocal tracks, specify any lead instrumentation that you desire. you can e-mail me at: hsteeler2002@yahoo.com or call me at 504-812-9018 cell or 985-657-0690 home for more information including prices. A 10% donation to the forum will come from any and all orders received. Thanks and I hope to hear from you.
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's[This message was edited by Hal Higgins on 09 January 2003 at 12:46 PM.] |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 9 Jan 2003 11:02 pm
|
|
Bump, Please
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's |
|
|
|
RON PRESTON
From: Dodson, Louisiana, USA
|
Posted 10 Jan 2003 5:00 am
|
|
Cool, Hal,
But, while I,m at it, where is Buras, La.? (I'm 12 miles north of Winnfield, on Hwy 34)Seems I might have ask you before, but I can,t remember. We are neighbors in this "Swamppy State"" you know. I would someday like to meet all the steel pickers from Louisiana. Anyway, I think that is a cool thing you are doing. The only thing is...CD's are OK, but, I would like the master on a cassestt...If you can't, that's OK, I will settle for the CD's....Now, I've got to figgure out which tunes I want, and what Key.
I will be Calling or E-mailing you.
Thanks, Hal, and Have a Great one, OK?
Regards, Ron Preston |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 10 Jan 2003 7:02 am
|
|
Hey Ron, thanks for responding. Buras is south of New Orleans on Hwy 23. Just about as far as you can go before you jump off into the water and get wet. If you look on the map, look at the southeastern most part of LA and you'll see Venice, I'm just North of there about 15 Mi. Putting tracks on cassette is no problem either. If that's how you want them, I'll be happy to accomodate. You can e-mail me and we'll discuss exactly what you want, and go from there. I'm the president of a steel guitar club here in the gulfcoast region, called Deep South Steel Guitar & Musicians Assoc. Our next meeting/jam will be on Feb. 1 in Gulfport, MS @ the VFW on Dedeaux Rd. How about meeting me there......we'll get things underway around noon. Take care and contact me. HAL
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's |
|
|
|
RON PRESTON
From: Dodson, Louisiana, USA
|
Posted 10 Jan 2003 1:30 pm
|
|
Good Lord, Hal...I guess you wouldn't want to buy any of my GATORS, Huh? You probebly have a few too many already.
Dag, The 1st of Febuary, I will be backing up a Nashville cat by the name of Trinni Triggs...His old steel player was a fellow by the name of Eddie Snow, who now plays 6 nights a week in a theatre in Eureka Springs, Ar.
Sorry, my Friend....BUT, DO NOT FRET, (no pun intended) I would LOVE to come down and be a "Guest PLayer" sometime...Anyway...I will call you in the next several days to confirm your "COOL" recording services for a song or 2, or 3, or 4....I do have a few in mind.
Thanks a lot, Hal...
Talk to ya later.
"Keep picking a winner"
Ron |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 10 Jan 2003 2:01 pm
|
|
Hey Ron....No I think I'll let you keep your own "gators" up there in Dodson, I've got enough of them down here. So you're the one that's taking Eddie Snows place. That's cool man....hit a lick or two for me. Make it worth my while on the number of tracks you want done. I'll tell you how I do them. I get a tempo set for the whole song, and do a click track on my recorder....go back and do a scratch piano track, add bass, acc. rhythm and drums, and whatever else might be necessary to give a good full sound. As a steeler, I like that good full sound behind me when I'm playing. Now if you want any other lead instruments (such as piano fills, etc.)let me know and I'll make room in the tracks for it. I do all of the instrumentation myself.....Looking forward to do some with ya....call me for prices, or e-mail me personally at: hsteeler2002@yahoo.com
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 11 Jan 2003 1:38 pm
|
|
Weekend Bump |
|
|
|
Bill Llewellyn
From: San Jose, CA
|
Posted 11 Jan 2003 7:23 pm
|
|
Hal, can you give us all an idea of what it would cost per track? Thanks! |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 11 Jan 2003 9:28 pm
|
|
Bill...I do all the music myself, and spend a good deal of time making sure all are top notch quality put together tracks w/drums, acc rhythm, piano, bass, and whatever other instrumentation might happen to fit the particular song in order to make the tracks full and something that you'll be proud to have.....35.00/track plus 5.95 S&H in lower 48. Mastered to one of three venues (1)CD (2) Mini-Disk or (3) Cassette. Thanks for your inquiry and I would like to be of service to you. Contact me via e-mail @ hsteeler2002@yahoo.com
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's[This message was edited by Hal Higgins on 19 February 2003 at 03:08 PM.] |
|
|
|
Ben ODell
From: Agricola, Mississippi, USA
|
Posted 12 Jan 2003 8:46 pm
|
|
Hey Brother Hal. Sorry I didn't get back to you. You how it is around here. Mickey has to just sometimes slap me out of the coma I stay in since turning the switches on in this studio
Bump/Bump
|
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 12 Jan 2003 9:52 pm
|
|
Hey Ben....thanks for the bump...I'm getting an e-mail or two on this....maybe it'll pick up good for me...... I'll be talkin to ya later...my good friend....
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's |
|
|
|
Bill Llewellyn
From: San Jose, CA
|
Posted 13 Jan 2003 7:40 am
|
|
Hal, thanks for the pricing info. I'm not at the point of needing to have any trax made (I have a home MIDI studio where I have done some of my own, actually). But I could see how such trax would be good not only for rehearsal purposes but also as backup for solo (or semi-solo) performers. Thanks for offering the service. Do you have any online demos we can all hear? |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 13 Jan 2003 8:11 am
|
|
Bill...once again I thank you for your response. I want to make this as affordable to players as possible, so I'm reformatting the whole procedure. I'm building up a repertoire of songs, and trying to do it in a format of 3 to 5 minutes per song. I've already done a couple (City Lights in D and I Fall To Pieces in F-G). They came out really nice. I'm mastering them to mini-disk at the moment, in digital format. I have a dual cd burner/player coming in shortly and a Zip-Disk drive coming for storage....where I can pull up any song that I have done to compile what someone would want. I will at a later date have a list of songs and the key they are performed in, available for people to choose from. I will also be doing a version with the steel parts included for those beginners who might not know the melody lines of a song. So, if someone would order 10 songs, if they so choose, they could get a CD, Mini-Disk or Cassette Tape format of the tracks with and without steel. With steel it would be 20 tracks for $35.00 or 10 tracks for $18.50 plus shipping costs. In answer to your other question, do I have any that I can put on the forum...at the moment no, only because I don't have the means, computer-wise to do that. Help me out here by spreading the word around to pickers that you think might benefit from this. Thanks again Bill for your response.....HAL
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's[This message was edited by Hal Higgins on 13 January 2003 at 08:13 AM.] [This message was edited by Hal Higgins on 13 January 2003 at 09:12 AM.] |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 15 Jan 2003 5:21 am
|
|
Bump^
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's |
|
|
|
RON PRESTON
From: Dodson, Louisiana, USA
|
Posted 15 Jan 2003 2:44 pm
|
|
Hal,
Checketh Thy E-mail....
Talk to Ya later, Picker. |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 15 Jan 2003 8:41 pm
|
|
It's checked Ron....and thanks for your order...call me with the rest of the material
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's |
|
|
|
MALCOLM KIRBY
From: Crofton, KY USA
|
Posted 16 Jan 2003 9:05 pm
|
|
Hal, I enjoyed talking to you the other night. Good luck with this venture. Tell Jerry Jaye hello for me. |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 16 Jan 2003 9:15 pm
|
|
Hey Malcolmb...the pleasure was mine....wish you could come down for one of our meeting/jams....maybe soon. Thanks, too for the encouragment to continue this venture, I've already received a few e-mails and phone calls.....hopw it takes off and keeps me busy for a long time.....b0b and the forum will benefit from it as well.....thanks for the bump, too....HAL
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 18 Jan 2003 7:46 pm
|
|
Bump ^
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 20 Jan 2003 8:35 pm
|
|
Starting to get some business....help me out here "Forumites".....Giving myself a ^bump^
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's |
|
|
|
John Heinrich
From: Whites Creek, TN, USA
|
Posted 21 Jan 2003 5:55 pm
|
|
Hey Hal, Sounds like a cool idea! I'll certainly listen around to see if anybody needs tracks. Keep on keepin' on!
John
------------------
[URL=http://www.johnheinrich.com]
www.johnheinrich.com"[/a]
Double 10 2001 Excel
Double 10 1974 MSA
|
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 21 Jan 2003 8:41 pm
|
|
John...thank you for the encouagement and hope to see you sometime soon.....
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 25 Jan 2003 7:30 am
|
|
Bump
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's |
|
|
|
Hal Higgins
From: Denham Springs, LA
|
Posted 3 Feb 2003 8:09 pm
|
|
Bump
------------------
Be Blessed........HAL
'85 Emmons LeGrande D-10, Rack w/Evans, Tubefex 2, 1501-4 BW's |
|
|
|
Ken Lang
From: Simi Valley, Ca
|
Posted 3 Feb 2003 8:46 pm
|
|
Hal:
Would you be interested in doing tracks for original songs.
You would be given a key, road map, suggestions for instrumentation and a demo of some kind to get the drift of the song.
I would be looking for a quality stero track suitable for a pitchable demo when completed.
Ken Lang
Willowgate Music
Zebadia_1@yahoo.com |
|
|
|