| Author |
Topic: Tuners |
Derrick Frank
From:
Berkshire, England
|
Posted 10 Aug 2008 7:28 am |
|
Hi guys, I have a tuning copendent that is not all 440, some of the pedals tune up to, eg. 8th string= 440+9, lower -18, rais+2.
Now this is a little time consuming befor each gig, and I wondered if there was a tuner where you could set these tunings up once only, then press a button on the tuner so the setting sets at440 even thou it retains the settings i previousley installed in it.
The off settins I have work great, but a bit of a pain to set up every time I get it out of the case, other musos see me reading the settings and ask me if I know how to tune the steel up. Regards, Slim. |
|
|
 |
Billy Murdoch
From:
Glasgow, Scotland, U.K.
|
Posted 10 Aug 2008 7:50 am
|
|
Derrick,
Have You considered the Peterson strobo flip?
It has two built in programmes for pedal steel and You can also store Your own preference.
best regards
Billy |
|
|
|
Mark van Allen
From:
Watkinsville, Ga. USA
|
Posted 10 Aug 2008 7:50 am
|
|
| Yeah, Derrick, the new generations of Peterson Virtual Strobe tuners will do exactly what you're looking for, many threads here to search for more info. A great tool. |
|
|
|
Derrick Frank
From:
Berkshire, England
|
Posted 10 Aug 2008 8:33 am tuner
|
|
| Many thanks guys, will have a look, Derrick. |
|
|
|
Billy Murdoch
From:
Glasgow, Scotland, U.K.
|
|
|
|
Brian Kurlychek
From:
Maine, USA
|
Posted 10 Aug 2008 9:42 am
|
|
I have a stroboflip. Now I just need to figure out how to get the tuning I want, and then to put it into the strobeo.
_________________
We live to play another day. |
|
|
|
Jim Peters
From:
St. Louis, Missouri, USA, R.I.P.
|
Posted 10 Aug 2008 10:54 am
|
|
Turbo tuner will do it also, and is less expensive. Mine works perfectly. JP
http://www.turbo-tuner.com/
_________________
Carter,PV,Fender |
|
|
|
Brick Spieth
From:
San Jose, California, USA
|
Posted 10 Aug 2008 12:37 pm
|
|
| I just got myself a strobo flip, and tuning takes less than half as long as it used to. |
|
|
|
