Pro Fex II --Question

Keith Hilton · From: 248 Laurel Road Ozark, Missouri 65721

Today, the word ****BYPASSED**** came on my Peavey Pro Fex II. What caused this and how can I get it working again? Razz

Dennis Wallis · From: Arkansas

Keith, it sounds like the "BYPASS" button may have been pushed or you may need a footswith to turn off the bypass function.It's been awhile since I've owned one but this seems to be the practical solution. Very Happy

Jack Stoner · From: Kansas City, MO

Keith, If you can't get it out of the bypass state you will probably have to do a "factory reset". However, make sure you have all your programs on a cache card or know someone that has a cache card with the programs so you can reload them. The reset clears out (erases) the user memory programs.

Ken Fox · From: Nashville GA USA

Like Jack said!

Also check the battery for leakage, if it is still there. If you continue to get that error on occasion I would suspect one of the 4 audio RAMS is bad.

I have 100's of those chips in stock, as it the same as the user memory chip that I replace with the battery-less memory chip.

We are leaving for Oregon tomorrow. Will be back Aug 22. If it needs help, send it on down Keith and I will fix it up for you!

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: