| Author |
Topic: older 70's zum |
jonathan goldberger
From:
New York, USA
|
Posted 25 Apr 2008 11:38 am |
|
Greetings...
I'm a relatively new steel guitar player. I'm about to upgrade from my gfi student model. Just curious if anybody's got an opinion on picking up an older 70's Zum steel (s10 3x4)? Is something 30 years old most likely gonna need some work? I've heard only the best about Zums...so...???
thanks, and thanks for a great forum! |
|
|
 |
Henry Matthews
From:
Texarkana, Ark USA
|
Posted 25 Apr 2008 12:23 pm
|
|
I would think that the older Zum would be a much better guitar. Zums are great guitars and if in good shape would difinitley be a big up grade for you. Good luck.--Henry
_________________
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
jonathan goldberger
From:
New York, USA
|
Posted 25 Apr 2008 12:39 pm
|
|
| I should add that alternatively, the new GFI expo is also a consideration, but i think a bit more in terms of cost... |
|
|
|
mike nolan
From:
Forest Hills, NY USA
|
Posted 25 Apr 2008 12:48 pm
|
|
You are probably looking at the one currently on ebay... It is a pull release mechanism, not the like the modern Zum which is all pull.... It will be sort of a different animal, tuning and setup wise than what you have now. Check with Bruce at Zumsteel to see if there are any copedent limitations with that set up.... probably sounds great.
I have worked on some Marlin pull release guitars, so if you go for the Zum, I can probably give you a hand with the setup..... Good luck. |
|
|
|
chris ivey
From:
california (deceased)
|
Posted 25 Apr 2008 4:45 pm
|
|
| i love zums..have played one for 26 years, but these early ones, neat as they are, might not be the best for advancing your learnig curve due to the limited mechanism. i second the emotion of calling bruce for advice on it! |
|
|
|
jonathan goldberger
From:
New York, USA
|
Posted 25 Apr 2008 6:29 pm
|
|
| thanks for the advice...I really appreciate it! |
|
|
|
CrowBear Schmitt
From:
Ariege, - PairO'knees, - France
|
Posted 26 Apr 2008 12:34 am
|
|
Jonathan, get the serial # of the Zum you mention & refer to Bruce Zumsteg about it
he'll set you right
Zums are wonderfull steels that Bruce puts a lot of pride & knowhow in
usually, one can't go wrong w; a ZumSteel |
|
|
|
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 26 Apr 2008 2:43 am
|
|
Bruce does not support the old model steels he made. He does not make parts for them. Others here have purchased them and reported on this.
Just because it is a Zum does not mean it is worth a lot. It is an old model and the mechanics are nothing like a new one.
From what I have been told, Bruce is sort of semi retired now. I guarantee you that he will not be interested in working on his old outdated designs. |
|
|
|
Dan Hatfield
From:
Columbia, Mo USA
|
Posted 26 Apr 2008 7:14 am
|
|
| Jonathan, for what it's worth, I own a '76 Zum, serial #4, and I also own a 2007 Zum, serial #1047. There is no doubt that Bruce has improved the mechanical aspects of his instruments over the years, but I love the old '76 (especially the tone) and have had basically ZERO problems with it and have no intentions of ever selling it. Just one person's opinion and experience; your mileage may vary. |
|
|
|
Darryl Logue
From:
Raytown, Missouri, USA
|
Posted 26 Apr 2008 2:18 pm
|
|
| Dan, My first Zum was a sd10 beautiful birdseye maple red. I think it was #3 or #4. It had a pushpull changer. What is yours? |
|
|
|
Dan Hatfield
From:
Columbia, Mo USA
|
Posted 27 Apr 2008 5:10 am
|
|
| Darryl, mine is a blue lacquer D-10, 8x5. Bruce showed me his log and it is definitely listed as #4. |
|
|
|
jonathan goldberger
From:
New York, USA
|
Posted 27 Apr 2008 8:13 am
|
|
| thanks again everybody...very informative. i'm thinking i'm probably gonna play it safe and get a new gfi expo. big thanks! |
|
|
|
