Author |
Topic: Peavey session 400 Limited instability |
Stewart Campbell
From: Scotland, UK
|
Posted 29 Mar 2008 3:17 pm
|
|
My session 400 performs ok for quite a long time and suddenly begins to squeal and when I switch it off/on its back to normal again, also the on/off switch has been replaced recently and the capacitor on the switch was lost, Can anyone give advice on this problem thanks,
Stewart Campbell Scotland. |
|
|
|
Chris Johnson
From: USA
|
Posted 29 Mar 2008 8:05 pm
|
|
Hey Stewart,
I had the same problem sometime last year with my limited. I would be playing, then suddenly the amp would scream with piercing highs. I resolved the problem by cutting the reverb all the way off. My reverb tank just needed to be replaced.
Hope that helps |
|
|
|
Stewart Campbell
From: Scotland, UK
|
Posted 30 Mar 2008 7:51 am Re Peavey amp
|
|
Hi Chris thanks for your response about the session 400 Limited I was wondering myself if the problem was related to reverb tank and I will take your advise and procceed fro there thanks
Stewart Campbell. Scotland |
|
|
|