| Author |
Topic: Peavey Rc 2000: With Which Peavey Products Does It Work? |
steve takacs
From:
beijing, china via pittsburgh (deceased)
|
Posted 26 Mar 2008 4:58 am |
|
Can anyone tell me if the RC 2000 controller works with the Peavey Bassfex? Which Peavey products does it work with and can it be used with any non-Peavey products.
I did write to Mike Brown but have not heard back yet. I recently used it with my Tubefex but just sold that, so I may need to sell the RC 2000 also. Thanks steve t |
|
|
 |
Danny Hullihen
From:
Harrison, Michigan
|
Posted 26 Mar 2008 5:06 am
|
|
| Steve. This unit also works with the Session 2000, (which is what it was originally designed for) and the Transtubefex and Tubefex processors. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 26 Mar 2008 5:08 am RC2000
|
|
| The RC2000 works with the Transtube Fex, Transfex Pro 212 amp, the Tubefex. It will most likely control preset selection on many other models though. |
|
|
|
steve takacs
From:
beijing, china via pittsburgh (deceased)
|
Posted 26 Mar 2008 1:06 pm
|
|
| Danyy, & Mike, Thanks to the both of you for your input. Guess I can rule out the Bassfex, but will try the RC 2000 with the Boss GX700 Preamp/Processor I have in the USA. steve t |
|
|
|
Marvin Born
From:
Ohio, USA
|
Posted 27 Mar 2008 7:19 am RC 2000
|
|
| The RC-2000 has a input jack for external power. Peavey sells an adapter. With external power it acts like a Midi controller so it may work on non Peavey products with a 5 wire cable. It uses a special 8 wire midi cable when used with the Peavey products. The two pots are assignable |
|
|
|
Bob Tuttle
From:
Republic, MO 65738
|
Posted 27 Mar 2008 8:11 am
|
|
| It is my understanding that the Bassfex is the same as the Profex II, except for the different factory presets. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 27 Mar 2008 10:02 am Session 2000
|
|
| I forgot that it also worked with the Session 2000. |
|
|
|
steve takacs
From:
beijing, china via pittsburgh (deceased)
|
Posted 19 Jul 2008 10:28 am Thanks Everyone
|
|
| Guys, thanks for the input. Much appreciated. Steve t |
|
|
|
