| Author |
Topic: Changer or tuner popping??? |
David Biggers
From:
Texas, USA
|
Posted 21 Mar 2008 9:35 am |
|
My Pedalmaster when adjusting the nylon tuners make a popping jester and go's very quickly from flat to sharp or vice versa..when tuning..
What would make my Pedalmaster do that.Only on two string though.. It has the same changer as the older 2003-4-5-6 GFI's I believe!
Springs?? rods? or what? Simple or major?
Please advise and thanks. |
|
|
 |
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 21 Mar 2008 9:54 am
|
|
| That's usually a spacer hanging up where it meets the finger, and then releasing as the finger moves. If there's such a spacer behind the nylon nut, remove it and slightly round the end of it (that faces the changer finger) with a file, and then reinstall it. Your "popping/jumping" problem should be gone. |
|
|
|
David Biggers
From:
Texas, USA
|
Posted 21 Mar 2008 10:04 am
|
|
| Thanks Donnie |
|
|
|
Lamar Colvin
From:
Havana, Florida, USA
|
Posted 21 Mar 2008 4:18 pm
|
|
| If The popping occurs when you turn the nylon nut,the fit on the rod may be too tight. Try running the nut in and out a few times to create some wear |
|
|
|
David Biggers
From:
Texas, USA
|
Posted 21 Mar 2008 9:11 pm
|
|
I will check that. There are no spacers on the rods or tuner ends.
Thanks again.............. |
|
|
|
