| Author |
Topic: GFI V knee lever |
Bill Pillmore
From:
Asheville, North Carolina, USA
|
Posted 18 Feb 2008 7:08 am |
|
Could someone send me a picture of the underside of their GFI that has a V knee lever. I am thinking of adding it my self and want to see how it goes in. I can't afford the down time of sending my steel off to the factory.
Thanks
Bill
bill@roadwormmusic.com |
|
|
 |
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 18 Feb 2008 7:26 am
|
|
I can get you some pic's this evening, Bill.
I just took a quick look, and can tell you that it won't be too difficult to do. |
|
|
|
Bill Pillmore
From:
Asheville, North Carolina, USA
|
Posted 18 Feb 2008 7:29 am
|
|
| Thanks. |
|
|
|
Dale Hansen
From:
Hendersonville,Tennessee, (USA)
|
Posted 18 Feb 2008 6:07 pm
|
|
Bill, Here are some photos
Bill, in the center of this picture,(above) you will see a cross rod that will need to be in position, along with 3 bellcranks. It is the shaft directly in front of LKR (pedal 5) (where the flash glare is)
Now, look where the grey strap where LKL is mounted.
The bracket for the V lever is positioned 3/4 of an inch to the back (farside),and 5 1/4 inches from the grey strap on the tuning peg head end to the nearest point of the V lever bracket.
GFI should be able to give you a complete inventory of the parts, and rods that you'll need.
If I can help you further, call me at (615) 618 0776 |
|
|
|
Bill Pillmore
From:
Asheville, North Carolina, USA
|
Posted 18 Feb 2008 6:34 pm
|
|
| Thanks I am looking forward to it. |
|
|
|
Dennis Wallis
From:
Arkansas
|
Posted 18 Feb 2008 10:15 pm
|
|
| They installed one on mine at the factory and I had it back within a week round trip. 6 days I believe. It might be worth the wait. |
|
|
|
