| Author |
Topic: Need Amphenol Connector Info |
Andy Sandoval
From:
Bakersfield, California, USA
|
Posted 11 Feb 2008 11:07 pm |
|
Searched the archives and couldn't find a site to order from. Need a spare. Switchcrafts site doesn't seem to have a checkout link.
 |
|
|
 |
John Roche
From:
England
|
|
|
|
Andy Sandoval
From:
Bakersfield, California, USA
|
Posted 12 Feb 2008 1:08 am
|
|
| I didn't see those connectors on that site? |
|
|
|
Dick Sexton
From:
Greenville, Ohio
|
|
|
|
John Bresler R.I.P.
From:
Thornton, Colorado
|
|
|
|
Pete Hunt
From:
Massachusetts, USA
|
Posted 14 Feb 2008 5:41 pm Amphenol connectors
|
|
I just picked up 5 of 'em off ebay. They're the type with spring ends rather than bullet ends like the ones pictured. Happy to send you one if you'd like- I'll never use all 5. email me at pkhunt1@verizon.net with your address and I'll drop it in the mail.
Pete Hunt |
|
|
|
Andy Sandoval
From:
Bakersfield, California, USA
|
Posted 15 Feb 2008 11:27 am
|
|
| Hi Pete, the spring ended ones are used to make up a cord I believe and the ones I've pictured are just an adaptor. I'll take you up on your offer and have emailed you my address. Thanks! |
|
|
|
Christopher Richards
From:
Colorado, USA
|
Posted 25 Jan 2022 4:51 pm Need Amphenol Connector Info
|
|
Those adapters you seek are always available at www.harmonicaplanet.com
Amphenol is a brand name, not a specific connector type. Amphenol's designation for 5/8" screw-on connectors is MC-1 (with various suffixes), the Switchcraft version is numbered 2501 (also with various suffixes) for a connector, the Switchcraft adapter like you seek is a 332AX (formerly just 332, then 332A, finally 332AX, all are basically the same thing). I don't think Amphenol ever made an adapter with that connector type, the ones you showed a picture of are Switchcraft.
There were also some Asian knockoffs produced for a while, but they weren't as sturdy, and are mostly gone now.
The ones with the spring are a Switchcraft 2501F connector, not an adapter. The connector has to soldered onto the end of a bare microphone cable, tricky process to get right with those.
A much better + more compact option is a cable with the screw connector built onto one end using the 2501F connector. Same Harmonica Planet website offers the Tone Defender Cable which has that connector type properly installed on one end, and a standard 1/4" male jack on the other. You can ignore the part on the website about it being for a harp mic, they mate and perform perfectly with those vintage steel guitars.
_________________
"In my youth I spent some money on fast cars, weed and women... the rest I just wasted" |
|
|
|
