| Author |
Topic: pac a seat height |
Curtis Boatright
From:
friscoTexas, USA
|
Posted 20 Jan 2008 6:51 pm |
|
Hi guys,
what is the average heigth of your pac-a-seat? i was using a bench seat and now have a PSG pac-a-seat .all is well other than my right knee hits the right knee lever a little high, the left knee is fine.im looking for heigth in inches.(and no i dont want to install a lift kit on my guitar)my seat is 21.5 inches now but the bench i was using was 19 inches.making adjustments to the seat will be very easy if i need to do that.
thanks guys
_________________
This is the day that the Lord has made and i will rejoice and be glad in it. |
|
|
 |
Louis Vallee
From:
Montreal, Quebec, Canada
|
Posted 20 Jan 2008 7:11 pm
|
|
21 inches for my Pac-a-seat and 1 inch lower kit for my PSG.
I am 5 ft. 5 inches tall. |
|
|
|
Billy Knowles
From:
Kenansville, N. C. 28349 usa
|
Posted 20 Jan 2008 8:01 pm seat
|
|
| I think the normal height is 21 inches. |
|
|
|
Louis Vallee
From:
Montreal, Quebec, Canada
|
Posted 20 Jan 2008 8:27 pm
|
|
The "Standard height" is not the same for all.
Steel Seat Standard is 20 inches
Steeler's Choice Standard is 21 inches
Walker Seat Standard is 22 inches
If you want to be sure, check with the Seat company, and if you buy new seat ask for your height. |
|
|
|
Ernie Pollock
From:
Mt Savage, Md USA
|
Posted 21 Jan 2008 6:27 am Pac seats
|
|
Curtis: I have two pac seats, I am 6'2 & always had to raise most of my steels, one day I got the bright idea to take a tubing cutter & cut about 1" off the legs on my GFI pac seat, that solved a lot of problems for me. I later lowered my other seat, can't remember which brand it is, but that fixed me up real good.
Ernie 
MSA S-12U, Marlen ST-10, GFI S-10 economy, Fender Steel King, Evans SE-150, Nashville 400 [Lemay mods] |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 21 Jan 2008 8:53 am
|
|
The good news is that the legs are quite easy to cut off!
I've never encountered one yet that's too low. |
|
|
|
