| Author |
Topic: dekley setup |
Curtis Boatright
From:
friscoTexas, USA
|
Posted 25 Nov 2007 5:37 pm |
|
| who has done a full setup on a s110 dekley slimline? how hard is it? |
|
|
 |
Lowell Whitney
From:
Waynoka, Oklahoma, USA
|
Posted 26 Nov 2007 5:01 am Dekley setup
|
|
Curtis, Contact Jim Smith.
LW
_________________
Carter SD10
70's Telecaster
Nashville 400/Express 112/Artist VT Bandit |
|
|
|
Dick Wood
From:
Springtown Texas, USA
|
Posted 26 Nov 2007 1:36 pm
|
|
I've done a complete rebuild and it's not really hard at all.
The small brass pieces that hold the rods can be frustrating at times and if you plan on taking the reversing mechanisum (sp) off, BE SURE AND TAKE A PICTURE AND/OR MAKE A DRAWING for reassembly later.
Also be sure to make notes of what holes the pull rods are in so you don't screw up the timing of various pulls. |
|
|
|
Curtis Boatright
From:
friscoTexas, USA
|
Posted 27 Nov 2007 4:43 pm dekely setup
|
|
my dekely is in like new condition,it just needs fine tuning adjustments.
i tried to get in touch with jim smith several times three monthe ago with no reply's from him. |
|
|
|
Dick Wood
From:
Springtown Texas, USA
|
Posted 27 Nov 2007 4:50 pm
|
|
I haven't seen Jim post on the Forum in a while.
If you'd like to call, I'd be happy to help you.
Phone #940-393-0746 |
|
|
|
Lowell Whitney
From:
Waynoka, Oklahoma, USA
|
Posted 27 Nov 2007 9:21 pm
|
|
Curtis, Send Jim a private message and he should reply. I contacted him earlier this month for some help and advice on my D-10. His forum email address won't work.
Lowell
_________________
Carter SD10
70's Telecaster
Nashville 400/Express 112/Artist VT Bandit |
|
|
|
Curtis Boatright
From:
friscoTexas, USA
|
Posted 28 Nov 2007 7:15 am dekley set up
|
|
| thanks for the help guys, i tried jim by pm,and e-mail but ill try him agin. |
|
|
|
