| Author |
Topic: Question about Magnum guitars |
Bill Moore
From:
Manchester, Michigan
|
Posted 25 Oct 2007 11:53 am |
|
Here's a question for you Magnum owners. I'd like to know the distance from the floor to the strings. Is it the same as most other guitars? Thanks.
BM
_________________
Bill Moore...
my steel guitar web page
 |
|
|
 |
Sonny Priddy
From:
Elizabethtown, Kentucky, USA, R.I.P.
|
Posted 25 Oct 2007 12:31 pm steel's
|
|
| I Have A GFI- JcH- And A Magnum They Are All About The Same. All Are Great Guitars. SONNY. |
|
|
|
Bill Moore
From:
Manchester, Michigan
|
Posted 25 Oct 2007 2:56 pm
|
|
| Can anyone tell me the actual measurement, floor to strings? |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 25 Oct 2007 3:36 pm
|
|
Bill, approx. 29 1/2" C6th neck and 29 3/4" E9th.
A remarkable guitar as well. P.S. I sell them.
Jerry |
|
|
|
Bill Moore
From:
Manchester, Michigan
|
Posted 26 Oct 2007 4:45 am
|
|
Thanks Jerry, I recently played one and was impressed with the pedal/lever action. The stock single coil pickup sounded really good too. I got the impression that the overall height of the guitar was just a little less than I was used to. Thanks again.
Bill |
|
|
|
Walter Killam
From:
Nebraska, USA
|
Posted 26 Oct 2007 5:42 am heighth adjustment
|
|
Hi Bill,
I found that on my Magnum, I could make some adjustment by screwing the pins at the bottom of the legs in or out, not a lot of adustment but enough in my case, I also like to tilt my guitar forward, so I went to Home Depot & got some longer pins for the back legs. Of course you can purchase kits also, but I didn't find that to be necessary. |
|
|
|
