| Author |
Topic: Pedal Bar Decal for MSA |
J. R. McClung
From:
Oklahoma, USA
|
Posted 22 Sep 2007 7:32 am |
|
Probably a shot in the dark, but there's bound to be a few out there, somewhere.
This is the decal with red, yellow, gray and black and it is for the PEDAL BAR on my 70's MSA.
_________________
Forget "world peace". Visualize using your turn signals. |
|
|
 |
Mike Wheeler
From:
Delaware, Ohio, USA
|
Posted 22 Sep 2007 8:44 am
|
|
I need one of those also. So, if there are two out there, please email me the price for the second one.
_________________
Best regards,
Mike |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 23 Sep 2007 7:56 am
|
|
I coped my old one on a scanner and had my son do touch up on it with Photo Shop. The original was printed on some sort of foil tape. So far I tried a water decal. It was OK, but just not the right material.
Wish I could find a better material to print it on. I have it set up to print multiple images on a single 81/2 x 11 sheet
 |
|
|
|
J. R. McClung
From:
Oklahoma, USA
|
Posted 23 Sep 2007 11:14 am
|
|
Thanks Ken,
I had thought of possibly using a photo to get a water decal made, then coating it with something to ensure some durability---maybe a really clear polyurethane or something of the sort.
Our new webmeister can probably make one for me right there in his office. Uh, that is, if Reece doesn't mind......since I'm only making one and none to sell.
BTW, those big chips you sent seemed to clear up the noise in the PROFEX quite a bit. Please remind me to reimburse you for the shipping when I holler for the batteryless mod.
_________________
Forget "world peace". Visualize using your turn signals. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 23 Sep 2007 11:20 am
|
|
I did make a water decal but it is a pain! It was not thick enough and it did not stick well to the bar.
That is why I am thinking a label with an adhesive back and possible made of metal foil, like the original. |
|
|
|
Al Udeen
From:
maple grove mn usa
|
Posted 30 Sep 2007 3:32 pm MSA pedal bar logo "Decal"
|
|
| I'm looking for one also! Anyone? |
|
|
|
Scott Howard
From:
Georgetown, TN, USA
|
Posted 30 Sep 2007 6:10 pm
|
|
| I would take 3. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 30 Sep 2007 6:55 pm
|
|
| I sent Reese an email with a link to this thread. Maybe he can advise us as to how to proceed or possibly help is getting some logos. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 2 Oct 2007 4:25 am MSA logo
|
|
I got an email back from Reese and I can produce the label for personal use and share (no for sale) with others.
When I get back from vacation in November I will look into it further.
I can send the sheet above to anyone wanting to try it sooner. It prints to scale. |
|
|
|
Mike Wheeler
From:
Delaware, Ohio, USA
|
Posted 3 Oct 2007 4:52 am
|
|
I need a decal for my MSA too. Could you send me that sheet, Ken. I'll drop you an email with address.
Thanks, bud.
_________________
Best regards,
Mike |
|
|
|
Mike Wheeler
From:
Delaware, Ohio, USA
|
Posted 3 Oct 2007 8:36 am
|
|
Well, I need a high res image of the MSA pedalbar decal. Ken's is good, but isn't high res. I might be able to have some of these made up, but the better the image, the better the result.
Can someone do a high res scan of this logo? Or even a high quality, high res photo? I can resize as needed.
If I have these decals made, I'll be making them available for cost only, as Reese requested.
Please email me if you can help out.
_________________
Best regards,
Mike |
|
|
|
Ernie Pollock
From:
Mt Savage, Md USA
|
Posted 5 Oct 2007 4:16 am Me Too!!
|
|
I would like to have one of those also, if it ever happens, which I hope it does. Let me know, I will buy one when it does!!
Ernie  |
|
|
|
Al Udeen
From:
maple grove mn usa
|
Posted 5 Oct 2007 7:22 am Fecal
|
|
| Same here! I need one |
|
|
|
Frank Harris
From:
San Diego, California, USA
|
Posted 8 Oct 2007 9:08 am msa decal
|
|
| Please send me one decal for msa pedal board Frank Harris 2727 de anza rd a-35 san diego ca 92109 your mod job on my profex is super and thanks for all your service to forum. |
|
|
|
Donnie Pierce
From:
Windsor, North Carolina, USA
|
Posted 9 Oct 2007 5:54 pm MSA Decal
|
|
Please put me on the list for one if it happens...Thanks Donnie Pierce
_________________
MSA Classic S-10,Zumsteel Encore
Fender Steel King,Fender Twin Reverb
Hilton Pedal,George L Cable
Black Box,Wet Reverb |
|
|
|
Mike Wheeler
From:
Delaware, Ohio, USA
|
Posted 13 Oct 2007 1:11 pm
|
|
It's great to see solid interest. And I'll happily get these made, but I need someone with a pristine decal to scan it, or photograph it, in high resolution in order to create the template.
Surely someone can do this for us "logo-challenged" pickers?
_________________
Best regards,
Mike |
|
|
|
Scott Howard
From:
Georgetown, TN, USA
|
Posted 22 Nov 2007 6:20 am
|
|
Any update on this? I just drug my D-12 out of the closet and it has a perfect one on it. This is the only good one I have out of 4 guitars. I don't have a good way to get a GOOD picture. It looks fadded in the picture but is clear as can be and colors are bright.
 |
|
|
|
Mike Wheeler
From:
Delaware, Ohio, USA
|
Posted 24 Nov 2007 5:04 pm
|
|
Hi Scott. I sure would love to get a high resolution scan/pic of that logo...it does look pristine! Do you have any buddies with a high resolution camera, or scanner, who could take on the challenge of creating a digital image of it? Then maybe you could email it to me.
I just need a very high res close-up in order to provide the graphics people with the clearest and cleanest image to start with. Email me if you think you might be able to help.
_________________
Best regards,
Mike |
|
|
|
