| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic What Lap Steel is this?
Reply to topic
Author Topic:  What Lap Steel is this?
Nic du Toit


From:
Milnerton, Cape, South Africa
Post  Posted 3 Sep 2007 9:12 am    
Reply with quote



Does anybody know the name of this Epiphone lap steel? And what year was it built?
The logo seems a very early design (pre-war?) and is pinned down with 3 small nails.
The knob is not original; did it originally have a Carousel knob?
It came with a big round black knob usually found on old radios.
Was there a pick guard? There was a wooden case, which was beyond repair.
The original rings around the tunershafts look like eyelets or shoerings.
The tuners are like mandolin in-line tuners and are a bit stiff.
The pickup and the pot are not original, but the guitar sounds great.

Any info is appreciated.
Regards
Nic
View user's profile Send private message Send e-mail Visit poster's website
Nic du Toit


From:
Milnerton, Cape, South Africa
Post  Posted 4 Sep 2007 8:53 pm    
Reply with quote

Bump
View user's profile Send private message Send e-mail Visit poster's website
Al Terhune


From:
Newcastle, WA
Post  Posted 4 Sep 2007 9:26 pm    
Reply with quote

Nic -- I've never seen this. I like it. It reminds me of the 10-string Alkires that they made, especially the fretboard, bridge and headstock. I've seen 7-string Epiphones, but I don't think an 8.
_________________
Al

My equipment:

One heck of a Wife
The ghost of a red Doberman
Several pairs of reading glasses strewn about
View user's profile Send private message Send e-mail
CrowBear Schmitt


From:
Ariege, - PairO'knees, - France
Post  Posted 5 Sep 2007 1:30 am    
Reply with quote

Electar ?
never have seen a 8 stringer either
or one knob
heck, back in those days many variants were ordered
has the one in the pic been refinished ?
looks like it to me
looks like a winner Nic
View user's profile Send private message Send e-mail Visit poster's website
Nic du Toit


From:
Milnerton, Cape, South Africa
Post  Posted 5 Sep 2007 8:09 am    
Reply with quote

No, it is not an Electar.

The guitar was painted black with a paintbrush, and the colour underneath was also black. It has been refinished now.

It was bought on a fleamarket in Holland for 25 cents in the mid-sixties. There was an aluminium triangular logo in the case with a very badly engraved name "Sipson".
It was stuck on the guitar during WWII (between 1940 and 1945) to protect the instrument from confiscation by the Germans. American music and products were not allowed at that time.

Somebody mentioned it might be a Epiphone "Coronet".
Was there such a guitar?
View user's profile Send private message Send e-mail Visit poster's website
Fred Kinbom


From:
Berlin, Germany, via Stockholm, Sweden.
Post  Posted 5 Sep 2007 12:33 pm    
Reply with quote

Nic du Toit wrote:
It was bought on a fleamarket in Holland for 25 cents in the mid-sixties. There was an aluminium triangular logo in the case with a very badly engraved name "Sipson".
It was stuck on the guitar during WWII (between 1940 and 1945) to protect the instrument from confiscation by the Germans. American music and products were not allowed at that time.


Fascinating story Nic!
_________________
www.fredrikkinbom.com - New lap steel album out now - listen here: fredrikkinbom.bandcamp.com/album/songs-for-lap-steel-and-harmonium
View user's profile Send private message Send e-mail Visit poster's website
Dan Sawyer

 

From:
Studio City, California, USA
Post  Posted 5 Sep 2007 1:10 pm    
Reply with quote

You have a Coronet. These were made from about 1939 to 1949. Yours is probably a later one, because the 1939 catalog clearly states that the Coronet was only available as a 6-string. The 1939 "Coronet Hawaiian" was a bargain-priced model. The body was a guitar shape made of maple and finished in black. The headstock had the Epiphone metal nameplate and the fingerboard was rosewood, had actual frets (!) and pearl dot inlays. A white Pyralin pickguard protected the top. The pickup was a single bar polepiece. They were supposed to have volume and tone controls, but it looks like yours doesn't. By 1941 the Coronet had an etched metal fingerboard and a side mounted input jack. 1939 prices: $35 or $75 with amp.
View user's profile Send private message Visit poster's website
Dan Sawyer

 

From:
Studio City, California, USA
Post  Posted 5 Sep 2007 3:13 pm    
Reply with quote

I just found one online. This looks to have the real frets and separate volume and tone controls. You can see what the pickguard looked like.

http://www.telapex.com/~cejjrpe/epicor.htm
View user's profile Send private message Visit poster's website
Nic du Toit


From:
Milnerton, Cape, South Africa
Post  Posted 5 Sep 2007 5:01 pm    
Reply with quote

Wow!
What a lot of information! Thank you so much, Dan.
This guitar had indeed 2 side mounted banana jacks and the pickup was a blade polepiece attached to the side of one internal U-shape magnet. The pickup coil was corroded beyond recognition and the magnet was broken. There was no cover. The frets are slots filled with white Pyralin. Now I must find a carousel knob.

Not bad for $0.25!
Thanks for the link!Smile
View user's profile Send private message Send e-mail Visit poster's website
Mike Black

 

From:
New Mexico, USA
Post  Posted 6 Sep 2007 12:08 pm    
Reply with quote

delete

Last edited by Mike Black on 10 Apr 2011 7:53 am; edited 1 time in total
View user's profile Send private message Send e-mail
Ron Whitfield

 

From:
Kaaawa, Hawaii, USA
Post  Posted 6 Sep 2007 12:13 pm    
Reply with quote

PU looks to be a Wallace TrueTone replacement.
View user's profile Send private message Send e-mail Visit poster's website
Nic du Toit


From:
Milnerton, Cape, South Africa
Post  Posted 6 Sep 2007 1:05 pm    
Reply with quote

Nope...It is an 8-string Emmons pickup that was added about 20 years ago.
I just must get rid of the Telecaster knob. Smile
View user's profile Send private message Send e-mail Visit poster's website
Mike Black

 

From:
New Mexico, USA
Post  Posted 6 Sep 2007 4:13 pm    
Reply with quote

delete

Last edited by Mike Black on 10 Apr 2011 7:53 am; edited 1 time in total
View user's profile Send private message Send e-mail
Nic du Toit


From:
Milnerton, Cape, South Africa
Post  Posted 6 Sep 2007 5:09 pm    
Reply with quote

Yes Mike, it is a 22-1/2" scale. It has an B11th tuning on it with extra heavy stainless steel wound strings. Hi-Lo E-C#-A-F#-D#-B-A-F#. 015 to.054.
The sound is a bit "Emmonsy" and the strings feel a bit low. In fact, the fretboard is rather thick (1/4") and the picks are sometimes touching the fretboard. The guitar sounds much better with B11 or A6. When C6 was on it, it did not sound very Hawaiian. I think C6 was too high. A6 or B11 has much more authority in its sound.

The U shape magnet was rusted and broken beyond repair. It had no magnetism left. The attached plate was bolted on one leg of the magnet and acted as the "blade" on which the coil was wound. This coil was green with corrosion and the wire was unusually thick. It was all stuck together in one lump of corrosion, with a cloth tape around it. The blade was very rough. All this stuff was thrown away in the sixties.

I don't think this was owned by a GI as the (Canadian) GI's only arrived in Holland on the 5th of May 1945. So there would be no need to protect the guitar with a fake logo during the war. This fake logo was also lost in the sixties. I have been told that the fake name "Sipson" was a name used by the Egmond guitar factory. I have no way to verify this.

The guitar was bought for One Dutch guilder on the fleamarket which at that time was equal to 25 cents Smile

There was a set of Black Carousel knobs on eBay last week, but the winner put it on automatic bidding, so I had no chance of winning it.

Next: I have to find a case for it.
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron