Search found 177 matches

https://bb.steelguitarforum.com/userpix2203/1036_Picture_104_1.jpg

Hi folks I just got my endplates back from the chrome shop , they came out excellent

https://www.shermsplating.com/

https://bb.steelguitarforum.com/userpix2203/1036_Cottles_Sweet_II_1.jpg

The total length of that bud is 4 1/2" , you'll notice that the bud has an axle and two pivot points , makes it alot easier it push , the more advanced guitars have this setup , but as you can se ...

That isn't what I said , I said that your gonna need mounting blocks for that middle shaft and its gonna be kinda cramped, you can do that but it will be pretty tricky installing it ,another thing tha ...

Your doing this with a hack saw vise and a drill press ,arnt you ? that's gonna take a he'll of alot of work , I think you need to get some better dementions on your pivot points and there's better wa ...

The main problem is like JD said , your not gonna have the half stops , and that's a biggie if you know what I mean

The standard all pull system keeps a lot better tune than the push pull. why anyb ...

Pedal steel guitars were made up from alot of different ideas , the end plate tuning nuts were invented from using nylon Hex Female Standoff Plastic computer Mounts
anybody can purchase them online c ...

Heres a profex 2 in.mint condition but he changed the battery and lost the newman presets , whats the big deal , i have one with the presets and i never use them , it has 128 factory presets and newma ...

the problem is I have two of them and the one I want to sell has the new battery and if I sell it I wont have the newman presets even though I dont use them but for resale value its better to have the ...

I have a peavey profex 2 for sale with newman presets power supply and a new battery $125.00 you pay shipping

https://bb.steelguitarforum.com/userpix2203/1036_Profex_08_3.jpg

https://bb.steelgui ...

Just change the springs from .045" thickness to .035" you really dont need the adjustment , you can shortin a spring to make it tighter or putting a small gap to make it looser, this was don ...

The old msa classic s-10 & s12 cases are the same i know , ive took an s-10 and made it a s-12 many.times , the only thing you have to change is you just add two fingers , but the case is exactl ...

Actually pedal steel guitars were invented by ww2 vets.
those guy's used airplane parts and hot rod carbarator linkage (couplings) thats how it first started

Ive been fooling around with pedal steel guitars for 50 years and we always called them pull pins.

There's alot of players in my neiborhood that have had that problem , for 20 years I kept breaking the third string , finally a guy named Hugh browie told me that he tunes his guitar to D9th and hardl ...

Finger Hole : Yeah my Mullen are 1 3/4" wide and I can get three simitones + or - from the center with about 1/8 " play on each side (all pull changer) , are you making your own changer ass ...

Is it wide or narrow mount and how many ohms is the one you have ?

I noticed that there is no dip shelf in the back apron side, also it doesn't look like the leg holes are angled 15% , what are the outside dementions ?, is it setup for for 3 pull 2 lower actuators , ...

I don't think that you'll find a guitar that is set up exclusively for c6th , is what you need is an e9th with 3 & 4 and add two more pedals and youll have the standard Emmons c6th setup 5 & 4 ...

I call em fins or extention fins ,Mullen uses 3/32 " thickness , I think 1/4" thickness would be a little overkill , I've never seen any guitar that uses 1/4"
, I would suggest that y ...

Yeah what do you mean by flags ?

https://www.ebay.com/itm/313619440018?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=xJZQsVTjQLO&sssrc=4429486&ssuid=&var=&widget_ver=artemis&media=COPY

What is the actual size in inches "feet not included" ?

I have 30 , 3/8" hex or square shaft , 4 hole with 1/4" x 1/8" pull pins for sale for $12.00 each plus shipping to lower 48

https://bb.steelguitarforum.com/userpix2203/1036_Hex_03 ...

Author	Message
Topic: Chrome Shop
Rich Cottle Replies: 3 Views: 1249	Forum Section: Builders' Corner Posted: 1 Jan 2025 1:24 pm Subject: Decal
Rich Cottle Replies: 3 Views: 1249	https://bb.steelguitarforum.com/userpix2203/1036_Picture_104_1.jpg
Topic: Chrome Shop
Rich Cottle Replies: 3 Views: 1249	Forum Section: Builders' Corner Posted: 28 Dec 2024 9:57 am Subject: Chrome Shop
Rich Cottle Replies: 3 Views: 1249	Hi folks I just got my endplates back from the chrome shop , they came out excellent https://www.shermsplating.com/ https://bb.steelguitarforum.com/userpix2203/1036_Cottles_Sweet_II_1.jpg
Topic: Alternate Changer Mechanism
Rich Cottle Replies: 17 Views: 2385	Forum Section: Builders' Corner Posted: 19 Dec 2024 11:39 am Subject: Changert
Rich Cottle Replies: 17 Views: 2385	The total length of that bud is 4 1/2" , you'll notice that the bud has an axle and two pivot points , makes it alot easier it push , the more advanced guitars have this setup , but as you can se ...
Topic: Alternate Changer Mechanism
Rich Cottle Replies: 17 Views: 2385	Forum Section: Builders' Corner Posted: 18 Dec 2024 9:36 am Subject: Cantalever Changer
Rich Cottle Replies: 17 Views: 2385	That isn't what I said , I said that your gonna need mounting blocks for that middle shaft and its gonna be kinda cramped, you can do that but it will be pretty tricky installing it ,another thing tha ...
Topic: Alternate Changer Mechanism
Rich Cottle Replies: 17 Views: 2385	Forum Section: Builders' Corner Posted: 17 Dec 2024 1:37 pm Subject: Changer
Rich Cottle Replies: 17 Views: 2385	Your doing this with a hack saw vise and a drill press ,arnt you ? that's gonna take a he'll of alot of work , I think you need to get some better dementions on your pivot points and there's better wa ...
Topic: Alternate Changer Mechanism
Rich Cottle Replies: 17 Views: 2385	Forum Section: Builders' Corner Posted: 17 Dec 2024 11:03 am Subject: Changer
Rich Cottle Replies: 17 Views: 2385	The main problem is like JD said , your not gonna have the half stops , and that's a biggie if you know what I mean The standard all pull system keeps a lot better tune than the push pull. why anyb ...
Topic: Nylon tuner ends for Sho-Bud
Rich Cottle Replies: 2 Views: 538	Forum Section: Wanted To Buy Posted: 29 Oct 2024 10:02 am Subject: Tuners
Rich Cottle Replies: 2 Views: 538	Pedal steel guitars were made up from alot of different ideas , the end plate tuning nuts were invented from using nylon Hex Female Standoff Plastic computer Mounts anybody can purchase them online c ...
Topic: Peavey Pro Fex II sold
Rich Cottle Replies: 6 Views: 1290	Forum Section: For Sale: Amps and Accessories Posted: 28 Oct 2024 1:05 pm Subject: Newman presets
Rich Cottle Replies: 6 Views: 1290	Heres a profex 2 in.mint condition but he changed the battery and lost the newman presets , whats the big deal , i have one with the presets and i never use them , it has 128 factory presets and newma ...
Topic: Peavey Profex 2 for sale
Rich Cottle Replies: 3 Views: 736	Forum Section: For Sale: Amps and Accessories Posted: 28 Oct 2024 12:08 pm Subject: Im keeping it
Rich Cottle Replies: 3 Views: 736	the problem is I have two of them and the one I want to sell has the new battery and if I sell it I wont have the newman presets even though I dont use them but for resale value its better to have the ...
Topic: Peavey Profex 2 for sale
Rich Cottle Replies: 3 Views: 736	Forum Section: For Sale: Amps and Accessories Posted: 25 Oct 2024 6:01 am Subject: Peavey Profex 2 for sale
Rich Cottle Replies: 3 Views: 736	I have a peavey profex 2 for sale with newman presets power supply and a new battery $125.00 you pay shipping https://bb.steelguitarforum.com/userpix2203/1036_Profex_08_3.jpg https://bb.steelgui ...
Topic: MSA adjustable return springs
Rich Cottle Replies: 2 Views: 414	Forum Section: Wanted To Buy Posted: 9 Oct 2024 9:31 pm Subject: Springs
Rich Cottle Replies: 2 Views: 414	Just change the springs from .045" thickness to .035" you really dont need the adjustment , you can shortin a spring to make it tighter or putting a small gap to make it looser, this was don ...
Topic: Case for MSA U12
Rich Cottle Replies: 3 Views: 701	Forum Section: For Sale: Amps and Accessories Posted: 9 Oct 2024 9:27 am Subject: Case
Rich Cottle Replies: 3 Views: 701	The old msa classic s-10 & s12 cases are the same i know , ive took an s-10 and made it a s-12 many.times , the only thing you have to change is you just add two fingers , but the case is exactl ...
Topic: WTB End Mount Pedal Connectors
Rich Cottle Replies: 10 Views: 1337	Forum Section: Wanted To Buy Posted: 26 Sep 2024 7:15 pm Subject: Couplings
Rich Cottle Replies: 10 Views: 1337	Actually pedal steel guitars were invented by ww2 vets. those guy's used airplane parts and hot rod carbarator linkage (couplings) thats how it first started
Topic: WHAT are the bell crank lock barrels really called?
Rich Cottle Replies: 47 Views: 8059	Forum Section: Builders' Corner Posted: 19 Sep 2024 7:57 am Subject: Pull pins
Rich Cottle Replies: 47 Views: 8059	Ive been fooling around with pedal steel guitars for 50 years and we always called them pull pins.
Topic: Looking for dimensioned drawings of an all pull changer
Rich Cottle Replies: 6 Views: 2846	Forum Section: Builders' Corner Posted: 28 Aug 2024 3:55 pm Subject: Nothin
Rich Cottle Replies: 6 Views: 2846	Oops
Topic: Using a 12 ga. String Instead Of An 11 ga.
Rich Cottle Replies: 26 Views: 6823	Forum Section: Pedal Steel Posted: 23 Aug 2024 1:19 pm Subject: Third string problem
Rich Cottle Replies: 26 Views: 6823	There's alot of players in my neiborhood that have had that problem , for 20 years I kept breaking the third string , finally a guy named Hugh browie told me that he tunes his guitar to D9th and hardl ...
Topic: String stretch length
Rich Cottle Replies: 12 Views: 4433	Forum Section: Builders' Corner Posted: 7 Aug 2024 3:07 pm Subject: Finger hole
Rich Cottle Replies: 12 Views: 4433	Finger Hole : Yeah my Mullen are 1 3/4" wide and I can get three simitones + or - from the center with about 1/8 " play on each side (all pull changer) , are you making your own changer ass ...
Topic: PU with lesser output
Rich Cottle Replies: 7 Views: 1040	Forum Section: Wanted To Buy Posted: 29 Jun 2024 10:48 am Subject: Lesser than what
Rich Cottle Replies: 7 Views: 1040	Is it wide or narrow mount and how many ohms is the one you have ?
Topic: Steel guitar project
Rich Cottle Replies: 5 Views: 1822	Forum Section: For Sale: Steel Guitars Posted: 29 Jun 2024 7:58 am Subject: Questions
Rich Cottle Replies: 5 Views: 1822	I noticed that there is no dip shelf in the back apron side, also it doesn't look like the leg holes are angled 15% , what are the outside dementions ?, is it setup for for 3 pull 2 lower actuators , ...
Topic: CLOSE -- FOUND (10-string C6 single neck pedal steel)
Rich Cottle Replies: 9 Views: 1320	Forum Section: Wanted To Buy Posted: 16 Jun 2024 5:06 pm Subject: C6th Guitar
Rich Cottle Replies: 9 Views: 1320	I don't think that you'll find a guitar that is set up exclusively for c6th , is what you need is an e9th with 3 & 4 and add two more pedals and youll have the standard Emmons c6th setup 5 & 4 ...
Topic: Installing knee lever Flags
Rich Cottle Replies: 7 Views: 2570	Forum Section: Pedal Steel Posted: 11 Jun 2024 8:55 pm Subject: Flaggs
Rich Cottle Replies: 7 Views: 2570	I call em fins or extention fins ,Mullen uses 3/32 " thickness , I think 1/4" thickness would be a little overkill , I've never seen any guitar that uses 1/4" , I would suggest that y ...
Topic: Installing knee lever Flags
Rich Cottle Replies: 7 Views: 2570	Forum Section: Pedal Steel Posted: 9 Jun 2024 8:25 am Subject: Flags
Rich Cottle Replies: 7 Views: 2570	Yeah what do you mean by flags ?
Topic: Changer tuning nut
Rich Cottle Replies: 6 Views: 3586	Forum Section: Builders' Corner Posted: 21 May 2024 9:15 pm Subject: Pcb mounting posts
Rich Cottle Replies: 6 Views: 3586	https://www.ebay.com/itm/313619440018?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=xJZQsVTjQLO&sssrc=4429486&ssuid=&var=&widget_ver=artemis&media=COPY
Topic: George L's wide mount pickup...NO LONGER AVAILABLE
Rich Cottle Replies: 8 Views: 1290	Forum Section: For Sale: Amps and Accessories Posted: 13 Apr 2024 4:57 am Subject: Actual Size
Rich Cottle Replies: 8 Views: 1290	What is the actual size in inches "feet not included" ?
Topic: Bell Cranks For Sale
Rich Cottle Replies: 0 Views: 456	Forum Section: For Sale: Amps and Accessories Posted: 14 Mar 2024 11:55 pm Subject: Bell Cranks For Sale
Rich Cottle Replies: 0 Views: 456	I have 30 , 3/8" hex or square shaft , 4 hole with 1/4" x 1/8" pull pins for sale for $12.00 each plus shipping to lower 48 https://bb.steelguitarforum.com/userpix2203/1036_Hex_03 ...