Search found 21 matches

Just learned of b0b's passing. I am very sorry to hear it - shocked - like someone else said, I didn't see it coming.. My heartfelt sympathy goes to the Lee family and all his friends. As they say ...

No, David, I did not. I simply sprayed a little Tri-Flow on the axle between the rollers, assuming that it would penetrate. I just put a fresh set of string on the guitar, and did not want to make t ...

Yippee! I adjusted the return spring on the 4th string now faithfully return to pitch after E-Eb lower.

Many thanks to Paul, Lane, Ron, Michael, Erv, Jerry, Dick, and Ian for their great suggest ...

Thanks again. I am going to lubricate the rollers today and see if that helps. Since I have not been lubing the guitar, I should do it anyway. I will also take a look at endplate and see if it come ...

Reporting back. I applied Tri-Flow to the changer, flushed pretty liberally...managed not to make a mess. It did not work. E-Eb still does not return to pitch.

I am going to adjust the return spr ...

Thanks Paul and Lane.

I "looked under the hood" and it appears that I can only adjust the return springs by releasing them from the pull-rod, turning them, and reattaching to pull-rod. ...

I need a little help. I have an Emmons LL2 D10 (2001 vintage). For the last few years I have been fighting an irritating problem...the 4th string E does not return to pitch after I activate the &qu ...

My goodness! That absolutely takes my breath away! Thank God for Todd!

I want you to know that your Clinesmith S8 will be tucked in and read a bedtime story every night...rest assured it is goin ...

I'll send you a PM with my contact information. I can pay with PayPal or any way you prefer.

I recently ordered and received a split case from Kevin Hatton for my 2001 Emmons LeGrande D10. It fits like a glove, cuts the weight way down, and is beautifully made...it's really well built!

Kirk,

Here's some other two-note 7th chords...

(1) Raise high E to G (the 5th) and G to Bb (the b7th) gives you a two-note 7th chord that is "going to" the F position on the 5th fret. ...

I have bought more volume pedals than the law allows since my old favorite ZB Custom pedal started to fail a few years ago. I recently bought a Telonics pedal through Tom Bradshaw's PSG Products, and ...

When it comes to wood, I confess I don't know my Ash from a Walnut...I'll tell you that the guitar weighs a ton...the wood grain catches the light and has a "flamey shine" through the semi-t ...

I play a lot of jazz standards on C6 and A6 no-pedal and have had to resort to slants to get more complex chords (like m7b5, dim, aug, sus, etc.).

Nobody has mentioned the use of the "Bulle ...

I have a 1949 Fender Dual Professional that was lovingly restored by Bobbe Seymour at Steel Guitar Nashville. It came with the original case (striped luggage tweed, amber plastic handle), which has n ...

In one of those 6 wonderful Steel Guitarist Magazine issues that you can get for $25 through the SGF there's an article on Mooney, his copedant, and neck setup. His tuning is unusual, a hybrid...6th/ ...

Hey Mike,

Is this amp still for sale? I've looked at it before and was concerned about the "problem" it apparently has (makes a noise, have to unplug the speaker, then works fine)...but ...

Skip,

Please check your PM's

Kris

Randy,

Thanks for meeting me "half way" on the sale of this guitar (in Schulenburg, that is). I am thrilled with the guitar and the deal we made. You are a good guy and a straight-sho ...

Lynn, Please let me know if the sale doesn't go through for some reason. I would still be interested. Thanks, Kris

Lynn, Is this guitar still for sale? I can't get it out of my mind. Perhaps this guitar is meant to be mine? Kris

Author	Message
Topic: Robert Paul Lee (Bobby Lee) Aug 1949 - Mar 2023
Kristian Meisling Replies: 372 Views: 2959375	Forum Section: Rest in Peace b0b (Bobby Lee) Posted: 23 Apr 2023 2:19 pm Subject: Vaya con Dios b0b
Kristian Meisling Replies: 372 Views: 2959375	Just learned of b0b's passing. I am very sorry to hear it - shocked - like someone else said, I didn't see it coming.. My heartfelt sympathy goes to the Lee family and all his friends. As they say ...
Topic: Need Advice: E9 High E (4th) Not Returning to Pitch
Kristian Meisling Replies: 23 Views: 6058	Forum Section: Pedal Steel Posted: 5 May 2017 3:15 pm Subject: Need Advice: E9 High E (4th) Not Returning to Pitch
Kristian Meisling Replies: 23 Views: 6058	No, David, I did not. I simply sprayed a little Tri-Flow on the axle between the rollers, assuming that it would penetrate. I just put a fresh set of string on the guitar, and did not want to make t ...
Topic: Need Advice: E9 High E (4th) Not Returning to Pitch
Kristian Meisling Replies: 23 Views: 6058	Forum Section: Pedal Steel Posted: 5 May 2017 1:33 pm Subject: Need Advice: E9 High E (4th) Not Returning to Pitch
Kristian Meisling Replies: 23 Views: 6058	Yippee! I adjusted the return spring on the 4th string now faithfully return to pitch after E-Eb lower. Many thanks to Paul, Lane, Ron, Michael, Erv, Jerry, Dick, and Ian for their great suggest ...
Topic: Need Advice: E9 High E (4th) Not Returning to Pitch
Kristian Meisling Replies: 23 Views: 6058	Forum Section: Pedal Steel Posted: 5 May 2017 10:20 am Subject: Need Advice: E9 High E (4th) Not Returning to Pitch
Kristian Meisling Replies: 23 Views: 6058	Thanks again. I am going to lubricate the rollers today and see if that helps. Since I have not been lubing the guitar, I should do it anyway. I will also take a look at endplate and see if it come ...
Topic: Need Advice: E9 High E (4th) Not Returning to Pitch
Kristian Meisling Replies: 23 Views: 6058	Forum Section: Pedal Steel Posted: 4 May 2017 9:05 pm Subject: Need Advice: E9 High E (4th) Not Returning to Pitch
Kristian Meisling Replies: 23 Views: 6058	Reporting back. I applied Tri-Flow to the changer, flushed pretty liberally...managed not to make a mess. It did not work. E-Eb still does not return to pitch. I am going to adjust the return spr ...
Topic: Need Advice: E9 High E (4th) Not Returning to Pitch
Kristian Meisling Replies: 23 Views: 6058	Forum Section: Pedal Steel Posted: 3 May 2017 9:28 pm Subject: Need Advice: E9 High E (4th) Not Returning to Pitch
Kristian Meisling Replies: 23 Views: 6058	Thanks Paul and Lane. I "looked under the hood" and it appears that I can only adjust the return springs by releasing them from the pull-rod, turning them, and reattaching to pull-rod. ...
Topic: Need Advice: E9 High E (4th) Not Returning to Pitch
Kristian Meisling Replies: 23 Views: 6058	Forum Section: Pedal Steel Posted: 3 May 2017 3:37 pm Subject: Need Advice: E9 High E (4th) Not Returning to Pitch
Kristian Meisling Replies: 23 Views: 6058	I need a little help. I have an Emmons LL2 D10 (2001 vintage). For the last few years I have been fighting an irritating problem...the 4th string E does not return to pitch after I activate the &qu ...
Topic: Clinesmith S-8 lap steel - SOLD
Kristian Meisling Replies: 7 Views: 3414	Forum Section: For Sale: Steel Guitars Posted: 24 Apr 2012 11:08 am Subject: Holy Moly!
Kristian Meisling Replies: 7 Views: 3414	My goodness! That absolutely takes my breath away! Thank God for Todd! I want you to know that your Clinesmith S8 will be tucked in and read a bedtime story every night...rest assured it is goin ...
Topic: Clinesmith S-8 lap steel - SOLD
Kristian Meisling Replies: 7 Views: 3414	Forum Section: For Sale: Steel Guitars Posted: 23 Apr 2012 10:03 pm Subject: I'll Take It
Kristian Meisling Replies: 7 Views: 3414	I'll send you a PM with my contact information. I can pay with PayPal or any way you prefer.
Topic: I need a case for an Emmons D10
Kristian Meisling Replies: 5 Views: 1470	Forum Section: Wanted To Buy Posted: 17 Aug 2010 9:30 am Subject: My Hatton Split Case is awesome!
Kristian Meisling Replies: 5 Views: 1470	I recently ordered and received a split case from Kevin Hatton for my 2001 Emmons LeGrande D10. It fits like a glove, cuts the weight way down, and is beautifully made...it's really well built!
Topic: Seventh Chords on six string C6
Kristian Meisling Replies: 9 Views: 4035	Forum Section: Steel Without Pedals Posted: 3 Mar 2010 2:26 pm Subject: Seventh Chords on six string C6
Kristian Meisling Replies: 9 Views: 4035	Kirk, Here's some other two-note 7th chords... (1) Raise high E to G (the 5th) and G to Bb (the b7th) gives you a two-note 7th chord that is "going to" the F position on the 5th fret. ...
Topic: Volume Pedals
Kristian Meisling Replies: 12 Views: 3971	Forum Section: Steel Without Pedals Posted: 20 Feb 2010 1:42 pm Subject: Telonics Pedal
Kristian Meisling Replies: 12 Views: 3971	I have bought more volume pedals than the law allows since my old favorite ZB Custom pedal started to fail a few years ago. I recently bought a Telonics pedal through Tom Bradshaw's PSG Products, and ...
Topic: Fender d-8 lap steel
Kristian Meisling Replies: 14 Views: 8073	Forum Section: Steel Without Pedals Posted: 18 Feb 2010 12:08 pm Subject: Fender d-8 lap steel
Kristian Meisling Replies: 14 Views: 8073	When it comes to wood, I confess I don't know my Ash from a Walnut...I'll tell you that the guitar weighs a ton...the wood grain catches the light and has a "flamey shine" through the semi-t ...
Topic: /Serious / Slants /
Kristian Meisling Replies: 17 Views: 6466	Forum Section: Steel Without Pedals Posted: 18 Feb 2010 1:20 am Subject: Bullet Bar End
Kristian Meisling Replies: 17 Views: 6466	I play a lot of jazz standards on C6 and A6 no-pedal and have had to resort to slants to get more complex chords (like m7b5, dim, aug, sus, etc.). Nobody has mentioned the use of the "Bulle ...
Topic: Fender d-8 lap steel
Kristian Meisling Replies: 14 Views: 8073	Forum Section: Steel Without Pedals Posted: 17 Feb 2010 9:57 pm Subject: My '49 came without legs!
Kristian Meisling Replies: 14 Views: 8073	I have a 1949 Fender Dual Professional that was lovingly restored by Bobbe Seymour at Steel Guitar Nashville. It came with the original case (striped luggage tweed, amber plastic handle), which has n ...
Topic: Waylon and Some Cat On Steel
Kristian Meisling Replies: 4 Views: 2132	Forum Section: Steel on the Web Posted: 29 Sep 2008 7:42 pm Subject: Waylon and Some Cat On Steel
Kristian Meisling Replies: 4 Views: 2132	In one of those 6 wonderful Steel Guitarist Magazine issues that you can get for $25 through the SGF there's an article on Mooney, his copedant, and neck setup. His tuning is unusual, a hybrid...6th/ ...
Topic: Webb 6-14E
Kristian Meisling Replies: 3 Views: 2397	Forum Section: For Sale: Amps and Accessories Posted: 12 May 2008 5:04 pm Subject: Still for sale?
Kristian Meisling Replies: 3 Views: 2397	Hey Mike, Is this amp still for sale? I've looked at it before and was concerned about the "problem" it apparently has (makes a noise, have to unplug the speaker, then works fine)...but ...
Topic: Webb 614-E f/s----sold please close
Kristian Meisling Replies: 10 Views: 3079	Forum Section: For Sale: Amps and Accessories Posted: 23 Apr 2008 2:52 pm Subject: Intrested
Kristian Meisling Replies: 10 Views: 3079	Skip, Please check your PM's Kris
Topic: 2003 Glossy Rosewood Mica Emmons D10 Sold
Kristian Meisling Replies: 13 Views: 4320	Forum Section: For Sale: Steel Guitars Posted: 26 Mar 2008 6:38 am Subject: Thank You Very Much!
Kristian Meisling Replies: 13 Views: 4320	Randy, Thanks for meeting me "half way" on the sale of this guitar (in Schulenburg, that is). I am thrilled with the guitar and the deal we made. You are a good guy and a straight-sho ...
Topic: '75 Emmons Lacquer Push-Pull D10 8x5 (SOLD)
Kristian Meisling Replies: 23 Views: 11421	Forum Section: For Sale: Steel Guitars Posted: 23 Mar 2008 9:21 am Subject: Backup
Kristian Meisling Replies: 23 Views: 11421	Lynn, Please let me know if the sale doesn't go through for some reason. I would still be interested. Thanks, Kris
Topic: '75 Emmons Lacquer Push-Pull D10 8x5 (SOLD)
Kristian Meisling Replies: 23 Views: 11421	Forum Section: For Sale: Steel Guitars Posted: 23 Mar 2008 7:26 am Subject: Very Tempted
Kristian Meisling Replies: 23 Views: 11421	Lynn, Is this guitar still for sale? I can't get it out of my mind. Perhaps this guitar is meant to be mine? Kris