Search found 13 matches

Hi,
I bought a used Boss GT-10 to try if it works as an effect board for my current band, where I have to switch between pedal steel and tellie. First thing I tried was to replace my Boss GE-7 with t ...

What I found out in the meantime: The third tone has the difference frequency (e.g. G5 784Hz and E5 659 Hz played together produce 125Hz, appr. a B2, I could verify this with Melodyne).
Yesterday I ...

Hi Jerry,
yes, you're absolutely right ... the closer, the higher, the worse. My experiments with Melodyne show me, that these intermodulations come from the two tones when played together. The prove ...

@Kevin: No, definitely no damping problem. I tried sloppy damping, it sounds different.

@Len: I don't believe in a resonating part either. This should be audible without amplification.

This morn ...

Why the hell should I run? First see what he has to offer ...

Thanks for pointing me to this other thread, Frank.
@Pete: I tried it straight to the amp, same problem.
What else did I do:
1. I can't hear it when I play the steel without the amp.
2. I hear it ...

Hey, sorry that I come back to this issue, but I was looking around once in a while for such a posting, but used "interference" as the keyword ... I have the same problem with my Cube 80 and ...

Thanks Doug, for this detailed explanation. So I was not entirely wrong, this serial number is indeed a bit weird. Ok, chances are the same to get say 1434 or 1481 or 1400 but exactly 1400 is still a ...

Thanks to you both!
No, the Sperzels are definitely not original. They have a matte finish which does not fit 100% and there are some (now unused) mounting holes visible which may have been used by t ...

Hi,
so here a few pictures, I hope the selection and quality is ok. I changed the Emmons single coil to a Bill Lawrence. The tuners are Sperzels.

Thanks in advance!

Karsten

http://bb.steel ...

Does anybody have any idea when this Emmons S10 was built?
The serial number on the changer says simply "1400", no "1400S" or whatever, only "1400". Maybe a replacement ...

Thank you for pointing me at Mike Sweeney. I wrote him an e-mail to see if we both can meet in his "pedal steel boot camp" at the end of May.

Karsten

Hi,
I'm from Germany and a guitar player for many years. I started pedal steel a few weeks ago and practice with Winnie Winston's book and what I find on youtube (mostly Mickey Adams). My family and ...

Author	Message
Topic: Dobro Sound with Boss GT10 replacing GE7
Karsten Gorkow Replies: 0 Views: 1093	Forum Section: Electronics Posted: 13 Oct 2014 11:30 am Subject: Dobro Sound with Boss GT10 replacing GE7
Karsten Gorkow Replies: 0 Views: 1093	Hi, I bought a used Boss GT-10 to try if it works as an effect board for my current band, where I have to switch between pedal steel and tellie. First thing I tried was to replace my Boss GE-7 with t ...
Topic: Roland Cube 80XL
Karsten Gorkow Replies: 18 Views: 7628	Forum Section: Electronics Posted: 29 Mar 2013 2:51 am Subject: Roland Cube 80XL
Karsten Gorkow Replies: 18 Views: 7628	What I found out in the meantime: The third tone has the difference frequency (e.g. G5 784Hz and E5 659 Hz played together produce 125Hz, appr. a B2, I could verify this with Melodyne). Yesterday I ...
Topic: Roland Cube 80XL
Karsten Gorkow Replies: 18 Views: 7628	Forum Section: Electronics Posted: 27 Mar 2013 3:27 pm Subject: Roland Cube 80XL
Karsten Gorkow Replies: 18 Views: 7628	Hi Jerry, yes, you're absolutely right ... the closer, the higher, the worse. My experiments with Melodyne show me, that these intermodulations come from the two tones when played together. The prove ...
Topic: Roland Cube 80XL
Karsten Gorkow Replies: 18 Views: 7628	Forum Section: Electronics Posted: 27 Mar 2013 5:40 am Subject: Roland Cube 80XL
Karsten Gorkow Replies: 18 Views: 7628	@Kevin: No, definitely no damping problem. I tried sloppy damping, it sounds different. @Len: I don't believe in a resonating part either. This should be audible without amplification. This morn ...
Topic: Roland Cube 80XL
Karsten Gorkow Replies: 18 Views: 7628	Forum Section: Electronics Posted: 26 Mar 2013 2:12 pm Subject: Satanic Intermodulations
Karsten Gorkow Replies: 18 Views: 7628	Why the hell should I run? First see what he has to offer ...
Topic: Roland Cube 80XL
Karsten Gorkow Replies: 18 Views: 7628	Forum Section: Electronics Posted: 26 Mar 2013 11:44 am Subject: Intermodulation
Karsten Gorkow Replies: 18 Views: 7628	Thanks for pointing me to this other thread, Frank. @Pete: I tried it straight to the amp, same problem. What else did I do: 1. I can't hear it when I play the steel without the amp. 2. I hear it ...
Topic: Roland Cube 80XL
Karsten Gorkow Replies: 18 Views: 7628	Forum Section: Electronics Posted: 26 Mar 2013 6:36 am Subject: Intermodulation
Karsten Gorkow Replies: 18 Views: 7628	Hey, sorry that I come back to this issue, but I was looking around once in a while for such a posting, but used "interference" as the keyword ... I have the same problem with my Cube 80 and ...
Topic: Emmons S10 Serial# 1400
Karsten Gorkow Replies: 8 Views: 4075	Forum Section: Pedal Steel Posted: 23 Feb 2013 6:47 am Subject: Emmons S10 Serial# 1400
Karsten Gorkow Replies: 8 Views: 4075	Thanks Doug, for this detailed explanation. So I was not entirely wrong, this serial number is indeed a bit weird. Ok, chances are the same to get say 1434 or 1481 or 1400 but exactly 1400 is still a ...
Topic: Emmons S10 Serial# 1400
Karsten Gorkow Replies: 8 Views: 4075	Forum Section: Pedal Steel Posted: 18 Feb 2013 10:09 am Subject: Emmons S10 Serial# 1400
Karsten Gorkow Replies: 8 Views: 4075	Thanks to you both! No, the Sperzels are definitely not original. They have a matte finish which does not fit 100% and there are some (now unused) mounting holes visible which may have been used by t ...
Topic: Emmons S10 Serial# 1400
Karsten Gorkow Replies: 8 Views: 4075	Forum Section: Pedal Steel Posted: 15 Feb 2013 3:53 pm Subject: Emmons S10 Serial# 1400
Karsten Gorkow Replies: 8 Views: 4075	Hi, so here a few pictures, I hope the selection and quality is ok. I changed the Emmons single coil to a Bill Lawrence. The tuners are Sperzels. Thanks in advance! Karsten http://bb.steel ...
Topic: Emmons S10 Serial# 1400
Karsten Gorkow Replies: 8 Views: 4075	Forum Section: Pedal Steel Posted: 14 Dec 2012 4:09 pm Subject: Emmons S10 Serial# 1400
Karsten Gorkow Replies: 8 Views: 4075	Does anybody have any idea when this Emmons S10 was built? The serial number on the changer says simply "1400", no "1400S" or whatever, only "1400". Maybe a replacement ...
Topic: Recommendation for a pedal steel teacher in Nashville
Karsten Gorkow Replies: 3 Views: 2139	Forum Section: For Sale: Music, Lessons, etc. Posted: 6 Apr 2012 11:02 pm Subject: Recommendation for a pedal steel teacher in Nashville
Karsten Gorkow Replies: 3 Views: 2139	Thank you for pointing me at Mike Sweeney. I wrote him an e-mail to see if we both can meet in his "pedal steel boot camp" at the end of May. Karsten
Topic: Recommendation for a pedal steel teacher in Nashville
Karsten Gorkow Replies: 3 Views: 2139	Forum Section: For Sale: Music, Lessons, etc. Posted: 5 Apr 2012 5:54 am Subject: Recommendation for a pedal steel teacher in Nashville
Karsten Gorkow Replies: 3 Views: 2139	Hi, I'm from Germany and a guitar player for many years. I started pedal steel a few weeks ago and practice with Winnie Winston's book and what I find on youtube (mostly Mickey Adams). My family and ...