Search found 45 matches

I've done this with my Marlen. I had a couple of original Marlen card stock fretboards and I had a friend of mine who is a drafting designer scan them and make a digital template. So I can alway prin ...

Probably like a Marlen pull release.

Tune the raises with pedals down at the keyhead. Let off the pedal and tune with the screw behind the changer.

Tune strings that lower with the keyhead fir ...

I had this one months ago. Built by Ralph Pierce in Indiana. If this is the same that just sold on Reverb recently, It used to be mine 6 months ago. I got it from someone who rebuilt the mechanics. I ...

I would think a lot of people just like a good resto project and enjoy the work, are good at it, and get satisfaction of the final results. The performance would be better most likely.
Personally, ...

That's what I do with my Marlen. I love it tuned down to D. I didn't set mine up at E9 to begin with so I am not sure what adjustments you'll have to address. I wouldn't think you's need to change g ...

I have been playing with this large Dunlop 921 for awhile. I always thought it sounded fine. I then started using the old Marlen bar that came with my guitar which is smaller.
I have no idea of it's ...

Yep, I prefer the volume pedal back off a bit. And I usually use nice cables. Kind of got in a rush when I got the 10-1 in and forgot about it.

Close this one up...I have found the problem. Crappy cable from pedal to steel.
When I swapped out pickup to the 10-1 I just used an old cable as I was in a hurry to test it. An old 70's curly cabl ...

Perhaps this is just how it is. I can't say it sounds bad as I like a softer high end but compared to the steel direct into the amp, the high end is severely cut. Is this normal for the Moyo pedal ...

That's a Pierce 8 string pedal steel from the late 60's. made in Winchester Indiana
I have had one and it had a lighter duty build, good tone and a rebuilt changer, The original changer is pretty pr ...

I am soon to find out but am just curious as what to expect from a GL 10-1 pickup on my old Marlen.

I will say I am fond of the original pickup in many ways but it seems to miss a bit of low end. ...

I wouldn't remove the whole piece either. I would use a business card like a putty knife and load it with Tightbond and paint it down into the opening and get as much coverage as possible Don't over ...

David,

That absolutely bums me out. UPS lost a beautiful Wurlitzer tube 145B electric piano I sold several years ago. Then didn't honor the claim. The buyer was kind enough to split the loss. Th ...

Thanks Richard.

That's what I was intending to do but I was able to get the pickup off the plate, which wasn't easy, They screw in from the bottom side of the plate and only one is accessible.

I ...

I am interested in trying some different PU in my Marlen. So....I have to remove the changer and rods etc just to do this?. Good lord.

I tried removing the stock pickup and took out the 3 height ...

The year is 1976 (serial # read backwards) and Marlens are no longer in business.
Mine is a 1968 so I don't have the window with the nylon tuners. So my knowledge, as limited as it is, will be a bit ...

Hello,

what year is your Marlen. Does it have the opening access on the end plate with nylon tuner or is does it just have the row of top screws for tuning?

Is your lower lever stop not allowin ...

I pretty much figured it wasn't an MSA but I personally like the look of this thing.

I stumbled across this from an old Reverb sale and it was advertised as an early MSA. The only thing that said MSA was the pedal cross bar. It uses cable rather than rods.
Anyone know what this is?
...

Not sure what year the Marlen you're dealing with is but My 68 uses Atlas mike stands for legs as did many Marlens. Those may be available somewhere reasonably?

joe

Looks like it's back up at $1900 by the same seller after it already sold for $900
a few hours ago. Did they deny the original buyer after the sale?

curious

I was doing the same when it was gone. My guess, it will be on sale on Reverb from Ft Lauderdale within a week.

Hi Glenn,

Curious as to what your Moyo Steels price ranges are?
I am fully intrigued by them.

BTW, i received the Moyo volume I ordered from you and must say I just love it. Great job. Great s ...

IDK, I had this wonderful little 8 string 4 pedal all raise Pierce that was tricky to tune but sounded quite good. I took off the 4th pedal,
The end tuning screws moved with the pull so it tuned oppo ...

I am looking at this Capri and am curious if anyone has any info on this. These are the only pics I have and I can't see it in person..

joe
https://bb.steelguitarforum.com/userpix1712/18755_Screen ...

Author	Message
Topic: Custom fretboard
Joseph Myers Replies: 5 Views: 2488	Forum Section: Pedal Steel Posted: 23 Dec 2019 8:16 am Subject: Custom fretboard
Joseph Myers Replies: 5 Views: 2488	I've done this with my Marlen. I had a couple of original Marlen card stock fretboards and I had a friend of mine who is a drafting designer scan them and make a digital template. So I can alway prin ...
Topic: Tuning
Joseph Myers Replies: 7 Views: 2038	Forum Section: Pedal Steel Posted: 16 Dec 2019 3:30 pm Subject: Tuning
Joseph Myers Replies: 7 Views: 2038	Probably like a Marlen pull release. Tune the raises with pedals down at the keyhead. Let off the pedal and tune with the screw behind the changer. Tune strings that lower with the keyhead fir ...
Topic: Anybody hear of a Pierce steel?
Joseph Myers Replies: 2 Views: 1346	Forum Section: Pedal Steel Posted: 22 Nov 2019 6:23 am Subject: Anybody hear of a Pierce steel?
Joseph Myers Replies: 2 Views: 1346	I had this one months ago. Built by Ralph Pierce in Indiana. If this is the same that just sold on Reverb recently, It used to be mine 6 months ago. I got it from someone who rebuilt the mechanics. I ...
Topic: If it ain't broke, don't fix it
Joseph Myers Replies: 5 Views: 2263	Forum Section: Pedal Steel Posted: 3 Nov 2019 7:46 am Subject: If it ain't broke, don't fix it
Joseph Myers Replies: 5 Views: 2263	I would think a lot of people just like a good resto project and enjoy the work, are good at it, and get satisfaction of the final results. The performance would be better most likely. Personally, ...
Topic: Lowering tuning a whole step -- What do I need to consider?
Joseph Myers Replies: 4 Views: 1705	Forum Section: Pedal Steel Posted: 1 Oct 2019 9:02 am Subject: Lowering tuning a whole step -- What do I need to consider?
Joseph Myers Replies: 4 Views: 1705	That's what I do with my Marlen. I love it tuned down to D. I didn't set mine up at E9 to begin with so I am not sure what adjustments you'll have to address. I wouldn't think you's need to change g ...
Topic: Does a larger bar dampen low end?
Joseph Myers Replies: 3 Views: 1449	Forum Section: Pedal Steel Posted: 12 Sep 2019 8:06 am Subject: Does a larger bar dampen low end?
Joseph Myers Replies: 3 Views: 1449	I have been playing with this large Dunlop 921 for awhile. I always thought it sounded fine. I then started using the old Marlen bar that came with my guitar which is smaller. I have no idea of it's ...
Topic: Should this Moyo volume pedal be killing my high end?
Joseph Myers Replies: 4 Views: 1587	Forum Section: Pedal Steel Posted: 1 Sep 2019 4:12 pm Subject: Should this Moyo volume pedal be killing my high end?
Joseph Myers Replies: 4 Views: 1587	Yep, I prefer the volume pedal back off a bit. And I usually use nice cables. Kind of got in a rush when I got the 10-1 in and forgot about it.
Topic: Should this Moyo volume pedal be killing my high end?
Joseph Myers Replies: 4 Views: 1587	Forum Section: Pedal Steel Posted: 1 Sep 2019 3:42 pm Subject: Should this Moyo volume pedal be killing my high end?
Joseph Myers Replies: 4 Views: 1587	Close this one up...I have found the problem. Crappy cable from pedal to steel. When I swapped out pickup to the 10-1 I just used an old cable as I was in a hurry to test it. An old 70's curly cabl ...
Topic: Should this Moyo volume pedal be killing my high end?
Joseph Myers Replies: 4 Views: 1587	Forum Section: Pedal Steel Posted: 1 Sep 2019 2:59 pm Subject: Should this Moyo volume pedal be killing my high end?
Joseph Myers Replies: 4 Views: 1587	Perhaps this is just how it is. I can't say it sounds bad as I like a softer high end but compared to the steel direct into the amp, the high end is severely cut. Is this normal for the Moyo pedal ...
Topic: Instrument I.D.
Joseph Myers Replies: 2 Views: 801	Forum Section: Pedal Steel Posted: 30 Aug 2019 5:32 am Subject: Instrument I.D.
Joseph Myers Replies: 2 Views: 801	That's a Pierce 8 string pedal steel from the late 60's. made in Winchester Indiana I have had one and it had a lighter duty build, good tone and a rebuilt changer, The original changer is pretty pr ...
Topic: George L's 10-1 on a Marlen Pull Release
Joseph Myers Replies: 0 Views: 696	Forum Section: Pedal Steel Posted: 22 Aug 2019 4:39 pm Subject: George L's 10-1 on a Marlen Pull Release
Joseph Myers Replies: 0 Views: 696	I am soon to find out but am just curious as what to expect from a GL 10-1 pickup on my old Marlen. I will say I am fond of the original pickup in many ways but it seems to miss a bit of low end. ...
Topic: Loose mica on Emmons
Joseph Myers Replies: 16 Views: 3420	Forum Section: Pedal Steel Posted: 22 Aug 2019 5:40 am Subject: Loose mica on Emmons
Joseph Myers Replies: 16 Views: 3420	I wouldn't remove the whole piece either. I would use a business card like a putty knife and load it with Tightbond and paint it down into the opening and get as much coverage as possible Don't over ...
Topic: Sad UPS story
Joseph Myers Replies: 27 Views: 8221	Forum Section: Pedal Steel Posted: 21 Aug 2019 1:47 pm Subject: Sad UPS story
Joseph Myers Replies: 27 Views: 8221	David, That absolutely bums me out. UPS lost a beautiful Wurlitzer tube 145B electric piano I sold several years ago. Then didn't honor the claim. The buyer was kind enough to split the loss. Th ...
Topic: Pickup Swap in Marlen, I have to tear this down..Really?
Joseph Myers Replies: 4 Views: 1189	Forum Section: Pedal Steel Posted: 15 Aug 2019 3:47 am Subject: Pickup Swap in Marlen, I have to tear this down..Really?
Joseph Myers Replies: 4 Views: 1189	Thanks Richard. That's what I was intending to do but I was able to get the pickup off the plate, which wasn't easy, They screw in from the bottom side of the plate and only one is accessible. I ...
Topic: Pickup Swap in Marlen, I have to tear this down..Really?
Joseph Myers Replies: 4 Views: 1189	Forum Section: Pedal Steel Posted: 14 Aug 2019 3:28 pm Subject: Pickup Swap in Marlen, I have to tear this down..Really?
Joseph Myers Replies: 4 Views: 1189	I am interested in trying some different PU in my Marlen. So....I have to remove the changer and rods etc just to do this?. Good lord. I tried removing the stock pickup and took out the 3 height ...
Topic: Problem with lowering tuning at changer
Joseph Myers Replies: 11 Views: 4198	Forum Section: Pedal Steel Posted: 11 Aug 2019 4:06 pm Subject: Problem with lowering tuning at changer
Joseph Myers Replies: 11 Views: 4198	The year is 1976 (serial # read backwards) and Marlens are no longer in business. Mine is a 1968 so I don't have the window with the nylon tuners. So my knowledge, as limited as it is, will be a bit ...
Topic: Problem with lowering tuning at changer
Joseph Myers Replies: 11 Views: 4198	Forum Section: Pedal Steel Posted: 11 Aug 2019 9:21 am Subject: Problem with lowering tuning at changer
Joseph Myers Replies: 11 Views: 4198	Hello, what year is your Marlen. Does it have the opening access on the end plate with nylon tuner or is does it just have the row of top screws for tuning? Is your lower lever stop not allowin ...
Topic: Is this really an old MSA?
Joseph Myers Replies: 4 Views: 1467	Forum Section: Pedal Steel Posted: 31 Jul 2019 9:21 am Subject: Is this really an old MSA?
Joseph Myers Replies: 4 Views: 1467	I pretty much figured it wasn't an MSA but I personally like the look of this thing.
Topic: Is this really an old MSA?
Joseph Myers Replies: 4 Views: 1467	Forum Section: Pedal Steel Posted: 29 Jul 2019 5:46 pm Subject: Is this really an old MSA?
Joseph Myers Replies: 4 Views: 1467	I stumbled across this from an old Reverb sale and it was advertised as an early MSA. The only thing that said MSA was the pedal cross bar. It uses cable rather than rods. Anyone know what this is? ...
Topic: Marlen Legs
Joseph Myers Replies: 3 Views: 1216	Forum Section: Wanted To Buy Posted: 28 Jul 2019 12:29 pm Subject: Marlen Legs
Joseph Myers Replies: 3 Views: 1216	Not sure what year the Marlen you're dealing with is but My 68 uses Atlas mike stands for legs as did many Marlens. Those may be available somewhere reasonably? joe
Topic: Well someone just got a steal of a steel! Push Pull!
Joseph Myers Replies: 8 Views: 2615	Forum Section: Pedal Steel Posted: 16 Jul 2019 3:43 pm Subject: Well someone just got a steal of a steel! Push Pull!
Joseph Myers Replies: 8 Views: 2615	Looks like it's back up at $1900 by the same seller after it already sold for $900 a few hours ago. Did they deny the original buyer after the sale? curious
Topic: Well someone just got a steal of a steel! Push Pull!
Joseph Myers Replies: 8 Views: 2615	Forum Section: Pedal Steel Posted: 16 Jul 2019 11:01 am Subject: Well someone just got a steal of a steel! Push Pull!
Joseph Myers Replies: 8 Views: 2615	I was doing the same when it was gone. My guess, it will be on sale on Reverb from Ft Lauderdale within a week.
Topic: Moyo
Joseph Myers Replies: 11 Views: 4233	Forum Section: Pedal Steel Posted: 6 Jul 2019 7:06 am Subject: Moyo
Joseph Myers Replies: 11 Views: 4233	Hi Glenn, Curious as to what your Moyo Steels price ranges are? I am fully intrigued by them. BTW, i received the Moyo volume I ordered from you and must say I just love it. Great job. Great s ...
Topic: Interesting steel for sale
Joseph Myers Replies: 5 Views: 2353	Forum Section: Pedal Steel Posted: 3 Jul 2019 4:46 am Subject: Interesting steel for sale
Joseph Myers Replies: 5 Views: 2353	IDK, I had this wonderful little 8 string 4 pedal all raise Pierce that was tricky to tune but sounded quite good. I took off the 4th pedal, The end tuning screws moved with the pull so it tuned oppo ...
Topic: Capri Pedal Steel...any info?
Joseph Myers Replies: 3 Views: 1417	Forum Section: Pedal Steel Posted: 2 Jul 2019 2:26 pm Subject: Capri Pedal Steel...any info?
Joseph Myers Replies: 3 Views: 1417	I am looking at this Capri and am curious if anyone has any info on this. These are the only pics I have and I can't see it in person.. joe https://bb.steelguitarforum.com/userpix1712/18755_Screen ...