Search found 58 matches

Tim - looks like that could be a real sweet piece...good luck!

This is cool...I stopped in here to search this model after seeing it - or it's twin, since it apparently was made locally - in a local music store in Cincinnati. It's an LDG setup 3/4 with Shobud bar ...

interesting...this is the first S10 I've seen. Different controls once again also. This would make a great starter body for someone's project guitar.

yep - I'm an airhead...

http://www.guitarelectronics.com/product/WD1H5R11_00/Guitar-Wiring-Diagram-1-Humbucker-1-Volume-1-tone-5-way-rotary-switch-series-North-coil-parallel-South-coil-Series-rever ...

Bill,
Heres a link to exactly the wiring rig I used, although you'll see the site has schematics for almost any arrangement you can think of, along with the switches, pots & everything else if yo ...

hey Bill...sounds like the battery circuit might be for the LEDs; I've heard of other Doms having these but not mine, so I'm no help. I used standard Emmons kits with the square bars and 14-hole pulle ...

Hi Bill,
Glad to hear you're progressing on the project - other things do tend to get in the way. I had to look at the original as-shipped pics to remember that mine did have two knees when I receive ...

Duane - great thoughts on the problem. I measured the offsets: the first and second (and 10th & 9th) strings divert to the outside about 1/16" in less than an inch of length, making a kink ri ...

Thanks Duane...in terms of playability there's no comparison between this and my Pro-1, but you know that! This restoration was strictly for fun but I do thank you again for helping me get into a full ...

http://bb.steelguitarforum.com/userpix0912/4997_2635128857_7ab888af66_1.jpg
http://bb.steelguitarforum.com/userpix0912/4997_changer_top01_1.jpg
http://bb.steelguitarforum.com/userpix0912/4997_Dom_fi ...

Hi guys,
Duane, the pics posted earlier by Dave Simonis are indeed the guitar I bought from you a few years back, and that you posted above...it's been a while since I last visited the Forum and just ...

I agree with Bob...I have a '63 Super that I love and have no intention of selling, but would have a couple years back had I wanted to do so. I don't get the uptick in Showmans either...unless the hea ...

Gene, many thanks for the info...I hope you're enjoying seeing where some of these ended up as much as we are!

All the best to you and yours over the Holidays
John

Gene,
As everyone else has said, thanks so much for sharing your knowledge! I'm just now jumping into the vintage Sho-Bud addiction, and at the risk of piling on would love some info on mine:

Red ...

Jesse,
I haven't checked out Sketchup but I'll look it up...

Hi guys - just found this thread...I use 3dStudio Max on a fairly regular basis...another program from Autodesk who also make Inventor and Autocad. It's an awesome modeling and animation program and I ...

Anders,
PM sent.

bOb, got this taken care of - please close.

David,
I appreciate the reply and offer, but just this morning heard from Jeff Surratt at Show Pro and will be getting them from him. These seem to be in short supply though - let me know if you find ...

I'm looking for a bellcrank & barrel for a Pro-1. s.n.4349...it belongs (for now at least) to a buddy of mine and I'd like to add a raise to string 4 which it presently does not have. It came with ...

As Doc said above, John is still sitting in with PPL when needed; I've seen him with them twice in the past couple of years here in the Cincinnati area and had the pleasure of talking with him for a f ...

I dearly love Duane's old Domland but I've seen the future and its name is...Bud.

Pro-1 3x2 that needs to move to my house and grow three of Mr. Coops levers.

JM
http://bb.steelguitarforum.com/ ...

Good thread - probably helps all of us former smokers to know we're not alone. I had quit in 1990 after almost 20 years of fairly heavy use...lasted until one night in 2001 attending a friend's CD rol ...

wow - totally ger-geous, Mike...top and bottom!
JPM

I wish I could report who the steel player was and how great she sounded, but the show last night was cancelled due to "illness". Hopefully the same lineup will be in place if and whenever ...

Author	Message
Topic: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Forum Section: Pedal Steel Posted: 31 Jan 2019 11:48 am Subject: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Tim - looks like that could be a real sweet piece...good luck!
Topic: Harp brand PSG?
John Maggard Replies: 12 Views: 4767	Forum Section: Pedal Steel Posted: 23 Jan 2015 7:53 am Subject: Harp brand PSG?
John Maggard Replies: 12 Views: 4767	This is cool...I stopped in here to search this model after seeing it - or it's twin, since it apparently was made locally - in a local music store in Cincinnati. It's an LDG setup 3/4 with Shobud bar ...
Topic: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Forum Section: Pedal Steel Posted: 29 Jan 2011 11:25 am Subject: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	interesting...this is the first S10 I've seen. Different controls once again also. This would make a great starter body for someone's project guitar.
Topic: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Forum Section: Pedal Steel Posted: 6 Dec 2010 5:22 pm Subject: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	yep - I'm an airhead... http://www.guitarelectronics.com/product/WD1H5R11_00/Guitar-Wiring-Diagram-1-Humbucker-1-Volume-1-tone-5-way-rotary-switch-series-North-coil-parallel-South-coil-Series-rever ...
Topic: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Forum Section: Pedal Steel Posted: 4 Dec 2010 6:14 pm Subject: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Bill, Heres a link to exactly the wiring rig I used, although you'll see the site has schematics for almost any arrangement you can think of, along with the switches, pots & everything else if yo ...
Topic: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Forum Section: Pedal Steel Posted: 4 Dec 2010 5:13 pm Subject: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	hey Bill...sounds like the battery circuit might be for the LEDs; I've heard of other Doms having these but not mine, so I'm no help. I used standard Emmons kits with the square bars and 14-hole pulle ...
Topic: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Forum Section: Pedal Steel Posted: 28 Nov 2010 11:17 am Subject: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Hi Bill, Glad to hear you're progressing on the project - other things do tend to get in the way. I had to look at the original as-shipped pics to remember that mine did have two knees when I receive ...
Topic: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Forum Section: Pedal Steel Posted: 4 Oct 2010 5:52 pm Subject: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Duane - great thoughts on the problem. I measured the offsets: the first and second (and 10th & 9th) strings divert to the outside about 1/16" in less than an inch of length, making a kink ri ...
Topic: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Forum Section: Pedal Steel Posted: 4 Oct 2010 1:01 pm Subject: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Thanks Duane...in terms of playability there's no comparison between this and my Pro-1, but you know that! This restoration was strictly for fun but I do thank you again for helping me get into a full ...
Topic: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Forum Section: Pedal Steel Posted: 4 Oct 2010 12:20 am Subject: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	http://bb.steelguitarforum.com/userpix0912/4997_2635128857_7ab888af66_1.jpg http://bb.steelguitarforum.com/userpix0912/4997_changer_top01_1.jpg http://bb.steelguitarforum.com/userpix0912/4997_Dom_fi ...
Topic: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Forum Section: Pedal Steel Posted: 3 Oct 2010 11:56 pm Subject: Domland Stereo (Revisited)
John Maggard Replies: 48 Views: 22628	Hi guys, Duane, the pics posted earlier by Dave Simonis are indeed the guitar I bought from you a few years back, and that you posted above...it's been a while since I last visited the Forum and just ...
Topic: close
John Maggard Replies: 16 Views: 5381	Forum Section: For Sale: Amps and Accessories Posted: 3 Dec 2009 5:21 pm Subject: close
John Maggard Replies: 16 Views: 5381	I agree with Bob...I have a '63 Super that I love and have no intention of selling, but would have a couple years back had I wanted to do so. I don't get the uptick in Showmans either...unless the hea ...
Topic: Sho-Bud Serial Numbers
John Maggard Replies: 504 Views: 857615	Forum Section: Pedal Steel Posted: 25 Nov 2009 2:16 pm Subject: Sho-Bud Serial Numbers
John Maggard Replies: 504 Views: 857615	Gene, many thanks for the info...I hope you're enjoying seeing where some of these ended up as much as we are! All the best to you and yours over the Holidays John
Topic: Sho-Bud Serial Numbers
John Maggard Replies: 504 Views: 857615	Forum Section: Pedal Steel Posted: 23 Nov 2009 11:17 pm Subject: Sho-Bud Serial Numbers
John Maggard Replies: 504 Views: 857615	Gene, As everyone else has said, thanks so much for sharing your knowledge! I'm just now jumping into the vintage Sho-Bud addiction, and at the risk of piling on would love some info on mine: Red ...
Topic: AutoCAD for Home Builders
John Maggard Replies: 17 Views: 6538	Forum Section: Computers Posted: 21 Nov 2009 12:11 pm Subject: AutoCAD for Home Builders
John Maggard Replies: 17 Views: 6538	Jesse, I haven't checked out Sketchup but I'll look it up...
Topic: AutoCAD for Home Builders
John Maggard Replies: 17 Views: 6538	Forum Section: Computers Posted: 21 Nov 2009 12:33 am Subject: 3D stuff
John Maggard Replies: 17 Views: 6538	Hi guys - just found this thread...I use 3dStudio Max on a fairly regular basis...another program from Autodesk who also make Inventor and Autocad. It's an awesome modeling and animation program and I ...
Topic: Cutaway view of a steel?
John Maggard Replies: 12 Views: 4261	Forum Section: Pedal Steel Posted: 21 Nov 2009 12:14 am Subject: Cutaway view of a steel?
John Maggard Replies: 12 Views: 4261	Anders, PM sent.
Topic: Pro-1 parts
John Maggard Replies: 3 Views: 1064	Forum Section: Wanted To Buy Posted: 19 Nov 2009 9:01 am Subject: Pro-1 parts
John Maggard Replies: 3 Views: 1064	bOb, got this taken care of - please close.
Topic: Pro-1 parts
John Maggard Replies: 3 Views: 1064	Forum Section: Wanted To Buy Posted: 19 Nov 2009 8:59 am Subject: Pro-1 parts
John Maggard Replies: 3 Views: 1064	David, I appreciate the reply and offer, but just this morning heard from Jeff Surratt at Show Pro and will be getting them from him. These seem to be in short supply though - let me know if you find ...
Topic: Pro-1 parts
John Maggard Replies: 3 Views: 1064	Forum Section: Wanted To Buy Posted: 16 Nov 2009 12:17 pm Subject: Pro-1 parts
John Maggard Replies: 3 Views: 1064	I'm looking for a bellcrank & barrel for a Pro-1. s.n.4349...it belongs (for now at least) to a buddy of mine and I'd like to add a raise to string 4 which it presently does not have. It came with ...
Topic: John David Call's Shobud
John Maggard Replies: 33 Views: 22989	Forum Section: Steel Players Posted: 3 Apr 2008 8:45 am Subject: John David Call's Shobud
John Maggard Replies: 33 Views: 22989	As Doc said above, John is still sitting in with PPL when needed; I've seen him with them twice in the past couple of years here in the Cincinnati area and had the pleasure of talking with him for a f ...
Topic: PSG's, what's everybody playing these days?
John Maggard Replies: 108 Views: 35189	Forum Section: Pedal Steel Posted: 19 Nov 2007 11:56 pm Subject: PSG's, what's everybody playing these days?
John Maggard Replies: 108 Views: 35189	I dearly love Duane's old Domland but I've seen the future and its name is...Bud. Pro-1 3x2 that needs to move to my house and grow three of Mr. Coops levers. JM http://bb.steelguitarforum.com/ ...
Topic: Smoking and playing
John Maggard Replies: 54 Views: 12168	Forum Section: Steel Players Posted: 3 Nov 2007 11:10 pm Subject: Smoking and playing
John Maggard Replies: 54 Views: 12168	Good thread - probably helps all of us former smokers to know we're not alone. I had quit in 1990 after almost 20 years of fairly heavy use...lasted until one night in 2001 attending a friend's CD rol ...
Topic: Sho-Bud 6139
John Maggard Replies: 12 Views: 3981	Forum Section: Pedal Steel Posted: 3 May 2007 8:57 pm Subject: Sho-Bud 6139
John Maggard Replies: 12 Views: 3981	wow - totally ger-geous, Mike...top and bottom! JPM
Topic: Who is the Steel Player with Rod Stewart?
John Maggard Replies: 20 Views: 4030	Forum Section: Steel Players Posted: 3 May 2007 7:20 am Subject: Who is the Steel Player with Rod Stewart?
John Maggard Replies: 20 Views: 4030	I wish I could report who the steel player was and how great she sounded, but the show last night was cancelled due to "illness". Hopefully the same lineup will be in place if and whenever ...