Search found 415 matches

I had the bass and drum tracks put down a few years ago with friends. I am learning the PSG and added that in last year. I erased the vocal by mistake, so I had to redo that. Here is the mix, not sure ...

The other question is, he is asking a 100, is it worth it?

Can anyone tell me if this will fit in my Deckly S10?
https://bb.steelguitarforum.com/userpix2203/7705_pickup_3.jpg

Great idea. I'd add a ham radio setup and a home theater to it!

The home theater is in my basement. I don't do ham radio but it always sounded like fun.

Unfortunately a round trip to Billy Coopers would probably be an overnight affair for Jerry.

Until you find someone local (or an Internet buddy), there's a great resource at

Thanx, if I am goin ...

Dont know how far you're having to dig that ditch. Have you thought about renting a ditch digger? I rented one a couple years ago and it didn't cost much. Looks like your studio is coming right along. ...

That's a good looking setup. Hope you'll share some music with us. I'm just down the valley from you. Was up that way last night to the Natural Tunnel. Had intended to go to the Hob Nob, but it was to ...

Digging the trench for the electric. At 72 I wasn't sure I still had it in me. Had to chop out a large root with the mall. Where the two pipes cross the root goes straight down. I went at that for a w ...

I have a Dekley S10 and live near the border of Va.Tn. and Ky. 8 miles north of Kingsport Tn. She plays pretty good and I am a beginner. I need someone who knows what they are doing on the mechanical ...

Had it delivered three weeks ago. I should have the electric in this week. Wish me luck.
https://bb.steelguitarforum.com/userpix2203/7705_sd4_1.jpg

https://bb.steelguitarforum.com/userpix2203/770 ...

I was a CNC programmer for years. I would use a digitizer at times, trace out what I wanted, go around with the digitizer and pick points then connect the dots and program it. If it wasn't quite right ...

I will get some more pics but it will be awhile, I am in middle of working on my new studio and putting a new hot water heater in the house.
https://bb.steelguitarforum.com/userpix2203/7705_sd1_1.jpg ...

In the middle at the top, of the first picture, it looks like a stop for both ways, I am not sure what it is. But, the screw going through it on the right side of it with the nut on it; the nut was to ...

Here are some pictures I just took.
https://bb.steelguitarforum.com/userpix2203/7705_20070609_201743_1.jpg
https://bb.steelguitarforum.com/userpix2203/7705_20070609_201805_1.jpg
https://bb.steelg ...

I have 5 knee levers. The one you push up on has been added, the other four are factory. It lowers both B strings. I am not sure if they should be lowered a whole or half step? I guess that is subjec ...

I never got into VH. By the time they came out I was married with two kids. I couldn't relate anymore.

I think steel guitar could be a nice addition to a bit of Tears for Fears
I have to go through my collection. I think I have a CD of theirs. I never really played any country to any extent.

Had an 80s new wave rave in the basement. Cranked up the ole stereo and cranked up the PSG. It was fun playing the PSG along with the likes of Duran Duran and the Thompson Twins. Lots of songs in mino ...

One other observation. I have never really played country. I have sat in as a lead guitarist with country bands but I didn't know any of the songs, just give me the key. I played classic rock on stage ...

Are the pedal rods numbered or letter marked?

Those holes in the bar is sort of a puzzle to figure out and work with.

Good luck getting the pedals set up, Happy Steelin.
Marking the rod ...

I have the A, B and C pedals sitting pretty nicely. The Franklin pedal returns higher than the others. There is no return spring on the pedal rod pivot arm. There is no screw in the pivot arm to adjus ...

Jerry-
the two higher strings were added after the pedal steel had been around for a while, so they just threw them on top to not confuse existing players, is my understanding.
But it fact it helps ...

You can find a Dekley manual at the web page:

Thank you, that is very informative.

The wife came up with a good suggestion. She said, "you're only 5 hrs away from Nashville." Maybe I can set up an appointment, take it to someone, have them go through a set up with me and g ...

Did you try looking for a GFI manual? Or, you can check any manufacturer they work similar - like Ford vs Chevy - same parts, different fit.

I have a Williams so I go here.

https://www.williams ...

Author	Message
Topic: 1st PSG recording.
Jerry Dragon Replies: 1 Views: 2715	Forum Section: Recording Posted: 1 Jun 2024 1:30 am Subject: 1st PSG recording.
Jerry Dragon Replies: 1 Views: 2715	I had the bass and drum tracks put down a few years ago with friends. I am learning the PSG and added that in last year. I erased the vocal by mistake, so I had to redo that. Here is the mix, not sure ...
Topic: Will it fit?
Jerry Dragon Replies: 2 Views: 839	Forum Section: Electronics Posted: 6 Feb 2024 1:23 pm Subject: Will it fit?
Jerry Dragon Replies: 2 Views: 839	The other question is, he is asking a 100, is it worth it?
Topic: Will it fit?
Jerry Dragon Replies: 2 Views: 839	Forum Section: Electronics Posted: 6 Feb 2024 1:18 pm Subject: Will it fit?
Jerry Dragon Replies: 2 Views: 839	Can anyone tell me if this will fit in my Deckly S10? https://bb.steelguitarforum.com/userpix2203/7705_pickup_3.jpg
Topic: The new "Studio" lol.
Jerry Dragon Replies: 10 Views: 9024	Forum Section: Recording Posted: 29 Dec 2023 3:12 am Subject: The new "Studio" lol.
Jerry Dragon Replies: 10 Views: 9024	Great idea. I'd add a ham radio setup and a home theater to it! The home theater is in my basement. I don't do ham radio but it always sounded like fun.
Topic: Nearest help.
Jerry Dragon Replies: 4 Views: 1333	Forum Section: Pedal Steel Posted: 26 Dec 2023 10:26 pm Subject: Nearest help.
Jerry Dragon Replies: 4 Views: 1333	Unfortunately a round trip to Billy Coopers would probably be an overnight affair for Jerry. Until you find someone local (or an Internet buddy), there's a great resource at Thanx, if I am goin ...
Topic: The new "Studio" lol.
Jerry Dragon Replies: 10 Views: 9024	Forum Section: Recording Posted: 26 Dec 2023 12:55 am Subject: The new "Studio" lol.
Jerry Dragon Replies: 10 Views: 9024	Dont know how far you're having to dig that ditch. Have you thought about renting a ditch digger? I rented one a couple years ago and it didn't cost much. Looks like your studio is coming right along. ...
Topic: The new "Studio" lol.
Jerry Dragon Replies: 10 Views: 9024	Forum Section: Recording Posted: 24 Dec 2023 8:33 pm Subject: The new "Studio" lol.
Jerry Dragon Replies: 10 Views: 9024	That's a good looking setup. Hope you'll share some music with us. I'm just down the valley from you. Was up that way last night to the Natural Tunnel. Had intended to go to the Hob Nob, but it was to ...
Topic: The new "Studio" lol.
Jerry Dragon Replies: 10 Views: 9024	Forum Section: Recording Posted: 24 Dec 2023 8:28 pm Subject: The new "Studio" lol.
Jerry Dragon Replies: 10 Views: 9024	Digging the trench for the electric. At 72 I wasn't sure I still had it in me. Had to chop out a large root with the mall. Where the two pipes cross the root goes straight down. I went at that for a w ...
Topic: Nearest help.
Jerry Dragon Replies: 4 Views: 1333	Forum Section: Pedal Steel Posted: 23 Dec 2023 4:44 am Subject: Nearest help.
Jerry Dragon Replies: 4 Views: 1333	I have a Dekley S10 and live near the border of Va.Tn. and Ky. 8 miles north of Kingsport Tn. She plays pretty good and I am a beginner. I need someone who knows what they are doing on the mechanical ...
Topic: The new "Studio" lol.
Jerry Dragon Replies: 10 Views: 9024	Forum Section: Recording Posted: 23 Dec 2023 4:34 am Subject: The new "Studio" lol.
Jerry Dragon Replies: 10 Views: 9024	Had it delivered three weeks ago. I should have the electric in this week. Wish me luck. https://bb.steelguitarforum.com/userpix2203/7705_sd4_1.jpg https://bb.steelguitarforum.com/userpix2203/770 ...
Topic: CNC Files, drawings, CAD, PDF - POST HERE
Jerry Dragon Replies: 5 Views: 7949	Forum Section: Builders' Corner Posted: 23 Dec 2023 4:09 am Subject: CNC Files, drawings, CAD, PDF - POST HERE
Jerry Dragon Replies: 5 Views: 7949	I was a CNC programmer for years. I would use a digitizer at times, trace out what I wanted, go around with the digitizer and pick points then connect the dots and program it. If it wasn't quite right ...
Topic: Dekley question
Jerry Dragon Replies: 4 Views: 1075	Forum Section: Pedal Steel Posted: 27 Nov 2023 8:52 am Subject: Dekley question
Jerry Dragon Replies: 4 Views: 1075	I will get some more pics but it will be awhile, I am in middle of working on my new studio and putting a new hot water heater in the house. https://bb.steelguitarforum.com/userpix2203/7705_sd1_1.jpg ...
Topic: Dekley question
Jerry Dragon Replies: 4 Views: 1075	Forum Section: Pedal Steel Posted: 27 Nov 2023 4:06 am Subject: Dekley question
Jerry Dragon Replies: 4 Views: 1075	In the middle at the top, of the first picture, it looks like a stop for both ways, I am not sure what it is. But, the screw going through it on the right side of it with the nut on it; the nut was to ...
Topic: Dekley question
Jerry Dragon Replies: 4 Views: 1075	Forum Section: Pedal Steel Posted: 27 Nov 2023 4:03 am Subject: Dekley question
Jerry Dragon Replies: 4 Views: 1075	Here are some pictures I just took. https://bb.steelguitarforum.com/userpix2203/7705_20070609_201743_1.jpg https://bb.steelguitarforum.com/userpix2203/7705_20070609_201805_1.jpg https://bb.steelg ...
Topic: Dekley question
Jerry Dragon Replies: 4 Views: 1075	Forum Section: Pedal Steel Posted: 27 Nov 2023 3:16 am Subject: Dekley question
Jerry Dragon Replies: 4 Views: 1075	I have 5 knee levers. The one you push up on has been added, the other four are factory. It lowers both B strings. I am not sure if they should be lowered a whole or half step? I guess that is subjec ...
Topic: 80s rave
Jerry Dragon Replies: 6 Views: 3475	Forum Section: Steel Players Posted: 30 Oct 2023 3:34 am Subject: 80s rave
Jerry Dragon Replies: 6 Views: 3475	I never got into VH. By the time they came out I was married with two kids. I couldn't relate anymore.
Topic: 80s rave
Jerry Dragon Replies: 6 Views: 3475	Forum Section: Steel Players Posted: 17 Oct 2023 3:58 am Subject: 80s rave
Jerry Dragon Replies: 6 Views: 3475	I think steel guitar could be a nice addition to a bit of Tears for Fears I have to go through my collection. I think I have a CD of theirs. I never really played any country to any extent.
Topic: 80s rave
Jerry Dragon Replies: 6 Views: 3475	Forum Section: Steel Players Posted: 16 Oct 2023 6:24 am Subject: 80s rave
Jerry Dragon Replies: 6 Views: 3475	Had an 80s new wave rave in the basement. Cranked up the ole stereo and cranked up the PSG. It was fun playing the PSG along with the likes of Duran Duran and the Thompson Twins. Lots of songs in mino ...
Topic: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	Forum Section: Pedal Steel Posted: 9 Oct 2023 2:35 am Subject: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	One other observation. I have never really played country. I have sat in as a lead guitarist with country bands but I didn't know any of the songs, just give me the key. I played classic rock on stage ...
Topic: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	Forum Section: Pedal Steel Posted: 9 Oct 2023 2:23 am Subject: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	Are the pedal rods numbered or letter marked? Those holes in the bar is sort of a puzzle to figure out and work with. Good luck getting the pedals set up, Happy Steelin. Marking the rod ...
Topic: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	Forum Section: Pedal Steel Posted: 9 Oct 2023 2:21 am Subject: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	I have the A, B and C pedals sitting pretty nicely. The Franklin pedal returns higher than the others. There is no return spring on the pedal rod pivot arm. There is no screw in the pivot arm to adjus ...
Topic: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	Forum Section: Pedal Steel Posted: 9 Oct 2023 2:17 am Subject: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	Jerry- the two higher strings were added after the pedal steel had been around for a while, so they just threw them on top to not confuse existing players, is my understanding. But it fact it helps ...
Topic: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	Forum Section: Pedal Steel Posted: 8 Oct 2023 12:16 am Subject: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	You can find a Dekley manual at the web page: Thank you, that is very informative.
Topic: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	Forum Section: Pedal Steel Posted: 7 Oct 2023 10:41 am Subject: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	The wife came up with a good suggestion. She said, "you're only 5 hrs away from Nashville." Maybe I can set up an appointment, take it to someone, have them go through a set up with me and g ...
Topic: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	Forum Section: Pedal Steel Posted: 7 Oct 2023 9:15 am Subject: Another question, this time a pedal question
Jerry Dragon Replies: 27 Views: 8028	Did you try looking for a GFI manual? Or, you can check any manufacturer they work similar - like Ford vs Chevy - same parts, different fit. I have a Williams so I go here. https://www.williams ...