Search found 412 matches

This is a tape machine Reproduce Amplifier card designed to correct the NAB EQ recorded signal coming from the tape playback head.
I understand the NAB curves for tape machines, and I understand the ...

This is from a 1969 so it might be the same as your 1971?
Does your's have the coil tap switch in addition to the neck selector switch?

https://bb.steelguitarforum.com/userpix2203/6469_Marlen_Wiring_2.jpg

Found one.
You can close this.
Thanks,

I'm looking for knobs for a mid 80s Peavey Nashville 400.
Thanks.

That was me.
I just emailed you at your gmail adress.

I'm looking for a Sho Bud volume pedal.
The later rectangle one that mounts on the pedal bar.
Also would need the mounting bracket.
Thanks.

Thanks Bobby.
Now I understand why a previous owner had removed them from pedals 1-3 but left them on 4-8.
I'll leave it as is for now.

Thanks Ron.
Makes sense.

Do they help at all with lower returns on pedals that have lowers (like pedal 8 for example) or does the strength of the lower return springs make them insignificant in th ...

Maybe a JBL E130 (105dB SPL) or K130 (103dB SPL) depending on what power handling you need?

Unless you want a lightweight neo speaker then scratch that.

Late model Sho Bud pedal return torsion springs Yay or Nay? The ones that go on the cross shafts.

What are the pro's and cons?

I have a Super Pro that only has them on pedals 4 through 8.

Non ...

I'm looking for the chrome plated pot metal 5 hole hex-shaft bellcranks for a Super Pro.
Maybe there's some floating around since many people don't like them and have upgraded?
I need 6 of them idea ...

Thanks Johnie!

Very helpful.

Did the Super Pro originally come with a 3 way on/on/on neck seletor switch (for both necks on in the middle position) or a 2 way either/or switch?

Thanks Ricky.

Both this 1987 Super Pro as well as the 1991 Pro-I have these flat head screws.
Is it possible Sho Bud started using them later in the game?

I'll go with phillips head for functio ...

Anyone know where to find these?
I found stainless steel phillips head screws at Ace hardware that work fine but I'm trying to match the original flat head screws that look like maybe they're chrome ...

Good points Larry.

I think I figered it out with your guys help:

I mostly play in the within first 15%? of the volume pedal. The rest is only for sustain. So I set the amp eq for that first low ...

Interesting idea.
I'll try different setting and see what happens.
Thanks.

Using a passive Goodrich volume pedal into a Fender Tonemaster Twin changes the taper compared to a tube amp Twin.
Any ideas why? Anyone know the input impedance of a Tonemaster?

It doesn't sou ...

Cool thanks Barry.
Sent you an email.

A better picture - the bellcranks I'm looking for look like this:

I need 4 or 5 of them.

https://bb.steelguitarforum.com/userpix2203/6469_20240825_212957_1.jpg

A picture of the slack in the C pedal - note the gap between the bellcrank and the collar circled in red.

Once the slack is set to allow for the E lower, the C pedal travel might need to be increas ...

weekly bump up

Looks like a pull-release.

Try this:
https://b0b.com/wp/2019/04/tuning-a-70s-pull-release-marlen/

Author	Message
Topic: Equalization circuit question:
Ivan Funk Replies: 0 Views: 381	Forum Section: Electronics Posted: 9 Oct 2024 6:11 pm Subject: Equalization circuit question:
Ivan Funk Replies: 0 Views: 381	This is a tape machine Reproduce Amplifier card designed to correct the NAB EQ recorded signal coming from the tape playback head. I understand the NAB curves for tape machines, and I understand the ...
Topic: Marlen d-10 psg wiring Diagram
Ivan Funk Replies: 3 Views: 778	Forum Section: Pedal Steel Posted: 23 Sep 2024 11:38 pm Subject: Marlen d-10 psg wiring Diagram
Ivan Funk Replies: 3 Views: 778	This is from a 1969 so it might be the same as your 1971? Does your's have the coil tap switch in addition to the neck selector switch?
Topic: Marlen d-10 psg wiring Diagram
Ivan Funk Replies: 3 Views: 778	Forum Section: Pedal Steel Posted: 23 Sep 2024 11:06 pm Subject: Marlen d-10 psg wiring Diagram
Ivan Funk Replies: 3 Views: 778	https://bb.steelguitarforum.com/userpix2203/6469_Marlen_Wiring_2.jpg
Topic: Sho Bud volume pedal
Ivan Funk Replies: 1 Views: 542	Forum Section: Wanted To Buy Posted: 19 Sep 2024 4:13 pm Subject: Sho Bud volume pedal
Ivan Funk Replies: 1 Views: 542	Found one. You can close this. Thanks,
Topic: Peavey Nashville 400 knobs
Ivan Funk Replies: 2 Views: 453	Forum Section: Wanted To Buy Posted: 16 Sep 2024 7:43 pm Subject: Peavey Nashville 400 knobs
Ivan Funk Replies: 2 Views: 453	I'm looking for knobs for a mid 80s Peavey Nashville 400. Thanks.
Topic: Nashville 400 Head and reverb unit.
Ivan Funk Replies: 4 Views: 1055	Forum Section: For Sale: Amps and Accessories Posted: 15 Sep 2024 3:30 am Subject: Nashville 400 Head and reverb unit.
Ivan Funk Replies: 4 Views: 1055	That was me. I just emailed you at your gmail adress.
Topic: Sho Bud volume pedal
Ivan Funk Replies: 1 Views: 542	Forum Section: Wanted To Buy Posted: 12 Sep 2024 12:25 pm Subject: Sho Bud volume pedal
Ivan Funk Replies: 1 Views: 542	I'm looking for a Sho Bud volume pedal. The later rectangle one that mounts on the pedal bar. Also would need the mounting bracket. Thanks.
Topic: Pedal return springs yes or no?
Ivan Funk Replies: 4 Views: 744	Forum Section: Pedal Steel Posted: 11 Sep 2024 10:16 pm Subject: Pedal return springs yes or no?
Ivan Funk Replies: 4 Views: 744	Thanks Bobby. Now I understand why a previous owner had removed them from pedals 1-3 but left them on 4-8. I'll leave it as is for now.
Topic: Pedal return springs yes or no?
Ivan Funk Replies: 4 Views: 744	Forum Section: Pedal Steel Posted: 11 Sep 2024 7:54 pm Subject: Pedal return springs yes or no?
Ivan Funk Replies: 4 Views: 744	Thanks Ron. Makes sense. Do they help at all with lower returns on pedals that have lowers (like pedal 8 for example) or does the strength of the lower return springs make them insignificant in th ...
Topic: High efficiency speaker?
Ivan Funk Replies: 3 Views: 1174	Forum Section: Electronics Posted: 11 Sep 2024 2:35 pm Subject: High efficiency speaker?
Ivan Funk Replies: 3 Views: 1174	Maybe a JBL E130 (105dB SPL) or K130 (103dB SPL) depending on what power handling you need? Unless you want a lightweight neo speaker then scratch that.
Topic: Pedal return springs yes or no?
Ivan Funk Replies: 4 Views: 744	Forum Section: Pedal Steel Posted: 11 Sep 2024 2:28 pm Subject: Pedal return springs yes or no?
Ivan Funk Replies: 4 Views: 744	Late model Sho Bud pedal return torsion springs Yay or Nay? The ones that go on the cross shafts. What are the pro's and cons? I have a Super Pro that only has them on pedals 4 through 8. Non ...
Topic: Bellcranks for a Sho Bud Super Pro
Ivan Funk Replies: 0 Views: 393	Forum Section: Wanted To Buy Posted: 7 Sep 2024 7:26 pm Subject: Bellcranks for a Sho Bud Super Pro
Ivan Funk Replies: 0 Views: 393	I'm looking for the chrome plated pot metal 5 hole hex-shaft bellcranks for a Super Pro. Maybe there's some floating around since many people don't like them and have upgraded? I need 6 of them idea ...
Topic: Sho-Bud Super Pro neck selector switch
Ivan Funk Replies: 2 Views: 598	Forum Section: Electronics Posted: 6 Sep 2024 7:52 pm Subject: Sho-Bud Super Pro neck selector switch
Ivan Funk Replies: 2 Views: 598	Thanks Johnie! Very helpful.
Topic: Sho-Bud Super Pro neck selector switch
Ivan Funk Replies: 2 Views: 598	Forum Section: Electronics Posted: 6 Sep 2024 4:46 pm Subject: Sho-Bud Super Pro neck selector switch
Ivan Funk Replies: 2 Views: 598	Did the Super Pro originally come with a 3 way on/on/on neck seletor switch (for both necks on in the middle position) or a 2 way either/or switch?
Topic: Sho Bud pickup mounting screws
Ivan Funk Replies: 3 Views: 646	Forum Section: Wanted To Buy Posted: 6 Sep 2024 10:18 am Subject: Sho Bud pickup mounting screws
Ivan Funk Replies: 3 Views: 646	Thanks Ricky. Both this 1987 Super Pro as well as the 1991 Pro-I have these flat head screws. Is it possible Sho Bud started using them later in the game? I'll go with phillips head for functio ...
Topic: Sho Bud pickup mounting screws
Ivan Funk Replies: 3 Views: 646	Forum Section: Wanted To Buy Posted: 5 Sep 2024 10:34 pm Subject: Sho Bud pickup mounting screws
Ivan Funk Replies: 3 Views: 646	Anyone know where to find these? I found stainless steel phillips head screws at Ace hardware that work fine but I'm trying to match the original flat head screws that look like maybe they're chrome ...
Topic: Fender Tonemaster Twin with passive volume pedal.
Ivan Funk Replies: 7 Views: 1369	Forum Section: Electronics Posted: 26 Aug 2024 4:05 pm Subject: Fender Tonemaster Twin with passive volume pedal.
Ivan Funk Replies: 7 Views: 1369	Good points Larry. I think I figered it out with your guys help: I mostly play in the within first 15%? of the volume pedal. The rest is only for sustain. So I set the amp eq for that first low ...
Topic: Fender Tonemaster Twin with passive volume pedal.
Ivan Funk Replies: 7 Views: 1369	Forum Section: Electronics Posted: 26 Aug 2024 12:34 pm Subject: Fender Tonemaster Twin with passive volume pedal.
Ivan Funk Replies: 7 Views: 1369	Interesting idea. I'll try different setting and see what happens. Thanks.
Topic: Fender Tonemaster Twin with passive volume pedal.
Ivan Funk Replies: 7 Views: 1369	Forum Section: Electronics Posted: 26 Aug 2024 8:24 am Subject: Fender Tonemaster Twin with passive volume pedal.
Ivan Funk Replies: 7 Views: 1369	Using a passive Goodrich volume pedal into a Fender Tonemaster Twin changes the taper compared to a tube amp Twin. Any ideas why? Anyone know the input impedance of a Tonemaster? It doesn't sou ...
Topic: Marlen pull-release parts
Ivan Funk Replies: 5 Views: 1165	Forum Section: Wanted To Buy Posted: 26 Aug 2024 6:50 am Subject: Marlen pull-release parts
Ivan Funk Replies: 5 Views: 1165	Cool thanks Barry. Sent you an email.
Topic: Marlen pull-release parts
Ivan Funk Replies: 5 Views: 1165	Forum Section: Wanted To Buy Posted: 25 Aug 2024 5:40 pm Subject: Marlen pull-release parts
Ivan Funk Replies: 5 Views: 1165	A better picture - the bellcranks I'm looking for look like this: I need 4 or 5 of them. https://bb.steelguitarforum.com/userpix2203/6469_20240825_212957_1.jpg
Topic: Marlen pull-release parts
Ivan Funk Replies: 5 Views: 1165	Forum Section: Wanted To Buy Posted: 25 Aug 2024 4:59 am Subject: Marlen pull-release parts
Ivan Funk Replies: 5 Views: 1165	ttt
Topic: Help Needed
Ivan Funk Replies: 11 Views: 1597	Forum Section: Pedal Steel Posted: 24 Aug 2024 8:12 am Subject: Help Needed
Ivan Funk Replies: 11 Views: 1597	A picture of the slack in the C pedal - note the gap between the bellcrank and the collar circled in red. Once the slack is set to allow for the E lower, the C pedal travel might need to be increas ...
Topic: Pull-release S10 or SD10
Ivan Funk Replies: 3 Views: 1211	Forum Section: Wanted To Buy Posted: 20 Aug 2024 9:31 pm Subject: Pull-release S10 or SD10
Ivan Funk Replies: 3 Views: 1211	weekly bump up
Topic: Help Needed
Ivan Funk Replies: 11 Views: 1597	Forum Section: Pedal Steel Posted: 19 Aug 2024 9:55 pm Subject: Help Needed
Ivan Funk Replies: 11 Views: 1597	Looks like a pull-release. Try this: https://b0b.com/wp/2019/04/tuning-a-70s-pull-release-marlen/