Search found 379 matches

I always liked, "So, how long have you been playing, roughly?"

No offense to the person who gave up after the bad gig, but I think whatever your skill level, you need to have enough resilience to move on after a failure. I don't know if it's a skill you can learn ...

I have the F#>G on my guitar. Besides the bluesy 7th sounds you can also use that raise to go between major and minor thirds on the top two strings, which is nice for really fluid sounding melody s ...

I was the guy that asked about this recently.... All the suggestions were worth pursuing, but in the end I went with Greg's method, as the pull wasn't over tuned, and I don't have compensators or spli ...

Thanks all. It's out enough to hear, but applying additional pressure does seem to fix it, I just wasn't sure that was a normal practice, or just compensating for a problem I could fix. I'll take a lo ...

I have always had trouble getting my low C to return to pitch and I don't know if it's just impossible, or if I have something out of adjustment. I have had this problem on all the guitars I've owned. ...

I started to have shoulder pain a few years ago... I finally figure out that the seat I'd been using since I started playing was too low which caused me to raise my shoulder a little bit. I got a new ...

In regard to the perfect touch pick, are you guys all using the flat surface picks or the rounded ones?

Thanks
Gabriel

I have an S10 Emmons p/p reissue I'm considering selling. If it's of any interest let me know. It a green lacquer 3x4. It sounds great, I just can't get used to the single body.

Thanks,
Gabriel

Maybe you know this one already - it's kind of just a restatement of what Erv says, but you can just use your A pedal to raise your B string (the 5th of the open E chord) to C# (the 6th of the open E ...

I've argued about this question with some bands I've been in... I pretty much dress the same way all the time whether I'm on stage, at work, at home, anywhere. I just stick with my thing. I don't wher ...

Steve,

I bought a p/p that just happened to have a cabinet Paul made, and it really is a beautiful cabinet. If I ever needed one, I wouldn't hesitate to get another one of his....

Gabriel

I'm at the 12-13 year mark now - I didn't really start playing music with any seriousness until my mid 20's. I started the steel when I was 27 or 28..... Up to that point I had planned on pursuing an ...

I love Buddy Emmons' intro and turnaround on Ray Price's No Fool Like a Young Fool.

http://youtu.be/5nrJoN6EPVY

Paul,

Thanks for solving that mystery! It really is a beautiful cabinet - it's been well kept over the past 12 years.

Gabriel

Tom and Herb - thanks. I just sent an email to Mark and Paul. After a quick forum search, I found a couple cabinets made by Paul that are very much similar to mine.... Mark's are similar, too, but Pau ...

I contacted the seller - he was selling it for the widow of the owner apparently - to find out if he could give me any history of this guitar.... We'll see. I just know it came from Baltimore.....

Erv - thanks I didn't know that....maybe it really is a new body.

Erv, it is flocking, though - just red.

Skeeter,

It is certainly very similar, but not the same guitar.

Gabriel

Here are my reissue S10 and my newly acquired D10...
http://bb.steelguitarforum.com/userpix1504/5717_image_12.jpg
http://bb.steelguitarforum.com/userpix1504/5717_image_13.jpg

Thanks a lot for the help and input everyone. Here are a few more pictures that might help.....?
http://bb.steelguitarforum.com/userpix1504/5717_image_4.jpg
http://bb.steelguitarforum.com/userpix150 ...

Ron - got it - thanks.
Olli - perhaps, but it a pretty nice Birdseye, which I wouldn't expect under mica, but who knows?

Chris, there isn't anything clearly indicating either of them worked on it..... And the RKL is pretty obviously not up to their standards, hence the need for parts.... I'll get some more pics posted o ...

I'll try to do that this weekend....

Author	Message
Topic: A Nugget From Buddy E.
Gabriel Stutz Replies: 44 Views: 11368	Forum Section: Steel Players Posted: 15 May 2018 8:03 am Subject: A Nugget From Buddy E.
Gabriel Stutz Replies: 44 Views: 11368	I always liked, "So, how long have you been playing, roughly?"
Topic: Narrowing It Down
Gabriel Stutz Replies: 5 Views: 1463	Forum Section: Steel Players Posted: 6 Oct 2017 10:56 am Subject: Narrowing It Down
Gabriel Stutz Replies: 5 Views: 1463	No offense to the person who gave up after the bad gig, but I think whatever your skill level, you need to have enough resilience to move on after a failure. I don't know if it's a skill you can learn ...
Topic: Lever that raises atrings 1 & 7 to G
Gabriel Stutz Replies: 27 Views: 8405	Forum Section: Pedal Steel Posted: 1 Aug 2017 1:10 pm Subject: Lever that raises atrings 1 & 7 to G
Gabriel Stutz Replies: 27 Views: 8405	I have the F#>G on my guitar. Besides the bluesy 7th sounds you can also use that raise to go between major and minor thirds on the top two strings, which is nice for really fluid sounding melody s ...
Topic: Boo wah pedal question
Gabriel Stutz Replies: 8 Views: 2261	Forum Section: Pedal Steel Posted: 14 Mar 2017 6:42 am Subject: Boo wah pedal question
Gabriel Stutz Replies: 8 Views: 2261	I was the guy that asked about this recently.... All the suggestions were worth pursuing, but in the end I went with Greg's method, as the pull wasn't over tuned, and I don't have compensators or spli ...
Topic: trouble tuning the low C on C6
Gabriel Stutz Replies: 8 Views: 3955	Forum Section: Pedal Steel Posted: 14 Feb 2017 12:45 pm Subject: trouble tuning the low C on C6
Gabriel Stutz Replies: 8 Views: 3955	Thanks all. It's out enough to hear, but applying additional pressure does seem to fix it, I just wasn't sure that was a normal practice, or just compensating for a problem I could fix. I'll take a lo ...
Topic: trouble tuning the low C on C6
Gabriel Stutz Replies: 8 Views: 3955	Forum Section: Pedal Steel Posted: 14 Feb 2017 8:39 am Subject: trouble tuning the low C on C6
Gabriel Stutz Replies: 8 Views: 3955	I have always had trouble getting my low C to return to pitch and I don't know if it's just impossible, or if I have something out of adjustment. I have had this problem on all the guitars I've owned. ...
Topic: Sore right shoulder from tension (Is a pad the solution?)
Gabriel Stutz Replies: 14 Views: 4582	Forum Section: Pedal Steel Posted: 20 Dec 2016 8:18 am Subject: Sore right shoulder from tension (Is a pad the solution?)
Gabriel Stutz Replies: 14 Views: 4582	I started to have shoulder pain a few years ago... I finally figure out that the seat I'd been using since I started playing was too low which caused me to raise my shoulder a little bit. I got a new ...
Topic: most comfortable picks?
Gabriel Stutz Replies: 34 Views: 12389	Forum Section: Pedal Steel Posted: 11 Oct 2016 7:24 am Subject: most comfortable picks?
Gabriel Stutz Replies: 34 Views: 12389	In regard to the perfect touch pick, are you guys all using the flat surface picks or the rounded ones? Thanks Gabriel
Topic: S-10 Single Body
Gabriel Stutz Replies: 9 Views: 3120	Forum Section: Wanted To Buy Posted: 28 Jul 2016 3:19 pm Subject: S-10 Single Body
Gabriel Stutz Replies: 9 Views: 3120	I have an S10 Emmons p/p reissue I'm considering selling. If it's of any interest let me know. It a green lacquer 3x4. It sounds great, I just can't get used to the single body. Thanks, Gabriel
Topic: 6th chords on E9
Gabriel Stutz Replies: 15 Views: 8422	Forum Section: Pedal Steel Posted: 14 Jul 2016 1:42 pm Subject: 6th chords on E9
Gabriel Stutz Replies: 15 Views: 8422	Maybe you know this one already - it's kind of just a restatement of what Erv says, but you can just use your A pedal to raise your B string (the 5th of the open E chord) to C# (the 6th of the open E ...
Topic: How important is appearance ???
Gabriel Stutz Replies: 85 Views: 30268	Forum Section: Steel Players Posted: 9 Jun 2016 1:19 pm Subject: How important is appearance ???
Gabriel Stutz Replies: 85 Views: 30268	I've argued about this question with some bands I've been in... I pretty much dress the same way all the time whether I'm on stage, at work, at home, anywhere. I just stick with my thing. I don't wher ...
Topic: Need Push/Pull Cabinet Built
Gabriel Stutz Replies: 3 Views: 2286	Forum Section: Steel Players Posted: 16 May 2016 1:47 pm Subject: Need Push/Pull Cabinet Built
Gabriel Stutz Replies: 3 Views: 2286	Steve, I bought a p/p that just happened to have a cabinet Paul made, and it really is a beautiful cabinet. If I ever needed one, I wouldn't hesitate to get another one of his.... Gabriel
Topic: How many years have you been playing?
Gabriel Stutz Replies: 145 Views: 59997	Forum Section: Steel Players Posted: 28 Sep 2015 4:31 pm Subject: How many years have you been playing?
Gabriel Stutz Replies: 145 Views: 59997	I'm at the 12-13 year mark now - I didn't really start playing music with any seriousness until my mid 20's. I started the steel when I was 27 or 28..... Up to that point I had planned on pursuing an ...
Topic: What's your favorite PSG phrase/riff/fill?
Gabriel Stutz Replies: 88 Views: 38764	Forum Section: Steel Players Posted: 25 Sep 2015 6:18 pm Subject: What's your favorite PSG phrase/riff/fill?
Gabriel Stutz Replies: 88 Views: 38764	I love Buddy Emmons' intro and turnaround on Ray Price's No Fool Like a Young Fool. http://youtu.be/5nrJoN6EPVY
Topic: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Forum Section: Pedal Steel Posted: 21 Sep 2015 11:23 am Subject: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Paul, Thanks for solving that mystery! It really is a beautiful cabinet - it's been well kept over the past 12 years. Gabriel
Topic: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Forum Section: Pedal Steel Posted: 20 Sep 2015 9:28 am Subject: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Tom and Herb - thanks. I just sent an email to Mark and Paul. After a quick forum search, I found a couple cabinets made by Paul that are very much similar to mine.... Mark's are similar, too, but Pau ...
Topic: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Forum Section: Pedal Steel Posted: 20 Sep 2015 8:09 am Subject: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	I contacted the seller - he was selling it for the widow of the owner apparently - to find out if he could give me any history of this guitar.... We'll see. I just know it came from Baltimore.....
Topic: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Forum Section: Pedal Steel Posted: 20 Sep 2015 6:29 am Subject: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Erv - thanks I didn't know that....maybe it really is a new body.
Topic: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Forum Section: Pedal Steel Posted: 19 Sep 2015 8:44 am Subject: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Erv, it is flocking, though - just red.
Topic: For The EMMONS LOVERS ( Lets see your Guitar)
Gabriel Stutz Replies: 389 Views: 275731	Forum Section: Pedal Steel Posted: 19 Sep 2015 4:58 am Subject: For The EMMONS LOVERS ( Lets see your Guitar)
Gabriel Stutz Replies: 389 Views: 275731	Skeeter, It is certainly very similar, but not the same guitar. Gabriel
Topic: For The EMMONS LOVERS ( Lets see your Guitar)
Gabriel Stutz Replies: 389 Views: 275731	Forum Section: Pedal Steel Posted: 18 Sep 2015 3:58 pm Subject: For The EMMONS LOVERS ( Lets see your Guitar)
Gabriel Stutz Replies: 389 Views: 275731	Here are my reissue S10 and my newly acquired D10... http://bb.steelguitarforum.com/userpix1504/5717_image_12.jpg http://bb.steelguitarforum.com/userpix1504/5717_image_13.jpg
Topic: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Forum Section: Pedal Steel Posted: 18 Sep 2015 3:52 pm Subject: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Thanks a lot for the help and input everyone. Here are a few more pictures that might help.....? http://bb.steelguitarforum.com/userpix1504/5717_image_4.jpg http://bb.steelguitarforum.com/userpix150 ...
Topic: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Forum Section: Pedal Steel Posted: 18 Sep 2015 8:37 am Subject: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Ron - got it - thanks. Olli - perhaps, but it a pretty nice Birdseye, which I wouldn't expect under mica, but who knows?
Topic: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Forum Section: Pedal Steel Posted: 18 Sep 2015 4:27 am Subject: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Chris, there isn't anything clearly indicating either of them worked on it..... And the RKL is pretty obviously not up to their standards, hence the need for parts.... I'll get some more pics posted o ...
Topic: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	Forum Section: Pedal Steel Posted: 17 Sep 2015 2:16 pm Subject: My new Emmons - a couple questions....
Gabriel Stutz Replies: 33 Views: 10644	I'll try to do that this weekend....