Search found 350 matches

Hi folks ,
Is it possible to have a device like some form of coil that you directly plug into .That coil would have tappings on a rotary switch to alter the impedance which you then feed into your a ...

Hi guys,
Thanks for the positive and confirmatory replies.So glad the file technique was the answer.FYI my steel is a Mullen RP SD10 3x5.

My PSG has developed an intermittent
" click " on the B pedal .It didn't alter the tuning and didn't seem to come from the changer end but was felt thro the pedal.
I tried slightly movi ...

Hi All,
I bought one of these for my Mullen RP.I connect it to guitar endplate via an 18 inch or so lead and then its output to my ZB volume pedal using a patch lead.I changed the pot to 100K and g ...

Hi ,
You may have a couple of pull rods that are rubbing together due to very close proximity of each other at the bell crank.Pedalling causes the rods to slightly flex on actuation and as a result i ...

Hi all has anyone used the Gator pro go 48 note keyboard gigbag with a Mullen SD 10 royal precision?
Wondering if there is enough depth to allow for the knee lever cranks.Thinking of going down this ...

Hi All,
Removed the rotary dial, just pulls off,and polished it with methylated spirit ( you guys in the states probably call it rubbing alcohol or denatured alcohol).It took just a few minutes wit ...

Hi
It just pulls off.

Thanks Jack .Never occurred to me !!I will also do this with open E strings and AB deployed to get the Es in.

Hi all ,
When I tune the lower G# to A pull using the sweetened tuning it is flat especially as you go further up the neck .I have deliberately made sure the bar is parallel with the fret .Any sugge ...

Hi Tim,
Thanks for the reply.
How does the dial come off please?
Also I'm UK so never heard of goo gone so what is it please.
Regards Dave

Hi all,
I have the superb Peterson strobo tuner.Had it about 10 years.It functions as it should BUT the plastic rotary dial on the right seems to be going tacky .I presume this is some form of plasti ...

Hi All,
On a regular 6 string guitar the bridge saddles are adjustable to accommodate strings intonation going sharp or flat as you fret .
This makes me wonder if the industry standard of a fixed a ...

Hi all,
I have my vertical raise 5string up to D !
Gives a flat 7 in open and sus4 with pedals A and B which is a smoother change when playing 3 and 5 with AB and having to slide up 1 whilst releas ...

Hi I posted a similar question about a week ago here with no replies at mo.
I am thinking of getting the Orange Supercrush 100 combo after playing my Tele. thro one .They are a new product from Orang ...

Hi Folks,
Has anyone used an Orange Crush 100 combo for PSG?
Apparently they use JFETs and sound very warm and valve like on u tube vids using a Telecaster.

Hi folks
Has anyone tabbed out any stock licks buddy Cage used ? I don't mean the chromatic stuff he did just other fill in type of licks which made him so unique.Thanks in advance.

Thanks for all the replies.Could I ask you Brad....if I wanted to convert say a 500K pot to low impedance can it be done by putting a resistor in parallel to drop the value accordingly. Would it go be ...

I replaced the pot with a 100k and it seems to have cured the taper issue going straight into amp ( buffered with the new Fender "set level and buffer" unit )
Also with the old pot by using ...

Hi Folks
Could someone please explain why when I use a buffer between guitar and volume pedal then the taper is totally wrong .....most of the volume increase is at the end of the travel and unusabl ...

Thanks for the replies guys.Much appreciated.

Just fitted a 250K linear pot and the problem is resolved.Looks like a linear pot is the way forward.The volume now is very gradual and not lumpy at all.The original pot was wired correctly BTW.

Hi Folks.I know this is not PSG and please delete if not allowed.
I have a USA telecaster with a 250 k vol.pot and 250k no load to a grease bucket both pots are log. .The volume sweep is a bit lump ...

Hi Guys,
Many thanks for your info on glue suitability.It will help me a lot.Looks like water based might be the way forward and repositional glue a close second.Regards Dave.

Hi Folks
What is the best type of glue to put on a homemade sticker to enable it to adhere to a formica surface but yet be easy to remove if needed without leaving a glue mark or at least if it did ...

Author	Message
Topic: Varied Tap
Dave Hepworth Replies: 3 Views: 809	Forum Section: Electronics Posted: 6 Oct 2024 9:26 am Subject: Varied Tap
Dave Hepworth Replies: 3 Views: 809	Hi folks , Is it possible to have a device like some form of coil that you directly plug into .That coil would have tappings on a rotary switch to alter the impedance which you then feed into your a ...
Topic: Annoying click on B pedal
Dave Hepworth Replies: 8 Views: 1616	Forum Section: Pedal Steel Posted: 31 Aug 2024 1:30 am Subject: Annoying click on B pedal
Dave Hepworth Replies: 8 Views: 1616	Hi guys, Thanks for the positive and confirmatory replies.So glad the file technique was the answer.FYI my steel is a Mullen RP SD10 3x5.
Topic: Annoying click on B pedal
Dave Hepworth Replies: 8 Views: 1616	Forum Section: Pedal Steel Posted: 30 Aug 2024 10:47 am Subject: Annoying click on B pedal
Dave Hepworth Replies: 8 Views: 1616	My PSG has developed an intermittent " click " on the B pedal .It didn't alter the tuning and didn't seem to come from the changer end but was felt thro the pedal. I tried slightly movi ...
Topic: Fender Level Set Buffer Pedal
Dave Hepworth Replies: 0 Views: 726	Forum Section: Electronics Posted: 28 Aug 2024 6:33 am Subject: Fender Level Set Buffer Pedal
Dave Hepworth Replies: 0 Views: 726	Hi All, I bought one of these for my Mullen RP.I connect it to guitar endplate via an 18 inch or so lead and then its output to my ZB volume pedal using a patch lead.I changed the pot to 100K and g ...
Topic: Mullen changer "creak"
Dave Hepworth Replies: 8 Views: 1449	Forum Section: Pedal Steel Posted: 13 Jun 2024 2:03 am Subject: Mullen changer "creak"
Dave Hepworth Replies: 8 Views: 1449	Hi , You may have a couple of pull rods that are rubbing together due to very close proximity of each other at the bell crank.Pedalling causes the rods to slightly flex on actuation and as a result i ...
Topic: Gator pro go 48 keyboard bag
Dave Hepworth Replies: 5 Views: 1089	Forum Section: Pedal Steel Posted: 2 Apr 2024 4:17 pm Subject: Gator pro go 48 keyboard bag
Dave Hepworth Replies: 5 Views: 1089	Hi all has anyone used the Gator pro go 48 note keyboard gigbag with a Mullen SD 10 royal precision? Wondering if there is enough depth to allow for the knee lever cranks.Thinking of going down this ...
Topic: Peterson rotary dial issue.
Dave Hepworth Replies: 12 Views: 2003	Forum Section: Electronics Posted: 3 Sep 2023 2:19 am Subject: Peterson rotary dial issue.
Dave Hepworth Replies: 12 Views: 2003	Hi All, Removed the rotary dial, just pulls off,and polished it with methylated spirit ( you guys in the states probably call it rubbing alcohol or denatured alcohol).It took just a few minutes wit ...
Topic: Peterson rotary dial issue.
Dave Hepworth Replies: 12 Views: 2003	Forum Section: Electronics Posted: 2 Sep 2023 1:48 pm Subject: Peterson rotary dial issue.
Dave Hepworth Replies: 12 Views: 2003	Hi It just pulls off.
Topic: Newman presets on Peterson
Dave Hepworth Replies: 6 Views: 1218	Forum Section: Pedal Steel Posted: 1 Sep 2023 7:48 am Subject: Newman presets on Peterson
Dave Hepworth Replies: 6 Views: 1218	Thanks Jack .Never occurred to me !!I will also do this with open E strings and AB deployed to get the Es in.
Topic: Newman presets on Peterson
Dave Hepworth Replies: 6 Views: 1218	Forum Section: Pedal Steel Posted: 1 Sep 2023 7:28 am Subject: Newman presets on Peterson
Dave Hepworth Replies: 6 Views: 1218	Hi all , When I tune the lower G# to A pull using the sweetened tuning it is flat especially as you go further up the neck .I have deliberately made sure the bar is parallel with the fret .Any sugge ...
Topic: Peterson rotary dial issue.
Dave Hepworth Replies: 12 Views: 2003	Forum Section: Electronics Posted: 1 Sep 2023 12:45 am Subject: Peterson rotary dial issue.
Dave Hepworth Replies: 12 Views: 2003	Hi Tim, Thanks for the reply. How does the dial come off please? Also I'm UK so never heard of goo gone so what is it please. Regards Dave
Topic: Peterson rotary dial issue.
Dave Hepworth Replies: 12 Views: 2003	Forum Section: Electronics Posted: 31 Aug 2023 7:16 am Subject: Peterson rotary dial issue.
Dave Hepworth Replies: 12 Views: 2003	Hi all, I have the superb Peterson strobo tuner.Had it about 10 years.It functions as it should BUT the plastic rotary dial on the right seems to be going tacky .I presume this is some form of plasti ...
Topic: Adjustable intonation
Dave Hepworth Replies: 7 Views: 1521	Forum Section: Pedal Steel Posted: 18 Aug 2023 7:26 am Subject: Adjustable intonation
Dave Hepworth Replies: 7 Views: 1521	Hi All, On a regular 6 string guitar the bridge saddles are adjustable to accommodate strings intonation going sharp or flat as you fret . This makes me wonder if the industry standard of a fixed a ...
Topic: Ye Olde Vertical Lever
Dave Hepworth Replies: 21 Views: 5007	Forum Section: Pedal Steel Posted: 29 Jul 2023 2:10 am Subject: Ye Olde Vertical Lever
Dave Hepworth Replies: 21 Views: 5007	Hi all, I have my vertical raise 5string up to D ! Gives a flat 7 in open and sus4 with pedals A and B which is a smoother change when playing 3 and 5 with AB and having to slide up 1 whilst releas ...
Topic: Amp question
Dave Hepworth Replies: 5 Views: 2061	Forum Section: Electronics Posted: 19 Mar 2023 2:40 am Subject: Amp question
Dave Hepworth Replies: 5 Views: 2061	Hi I posted a similar question about a week ago here with no replies at mo. I am thinking of getting the Orange Supercrush 100 combo after playing my Tele. thro one .They are a new product from Orang ...
Topic: Orange Crush
Dave Hepworth Replies: 0 Views: 662	Forum Section: Electronics Posted: 10 Mar 2023 3:21 am Subject: Orange Crush
Dave Hepworth Replies: 0 Views: 662	Hi Folks, Has anyone used an Orange Crush 100 combo for PSG? Apparently they use JFETs and sound very warm and valve like on u tube vids using a Telecaster.
Topic: Buddy Cage licks
Dave Hepworth Replies: 1 Views: 1382	Forum Section: Tablature Posted: 27 Nov 2022 4:19 am Subject: Buddy Cage licks
Dave Hepworth Replies: 1 Views: 1382	Hi folks Has anyone tabbed out any stock licks buddy Cage used ? I don't mean the chromatic stuff he did just other fill in type of licks which made him so unique.Thanks in advance.
Topic: Buffer and volume pedal compatibility
Dave Hepworth Replies: 13 Views: 3165	Forum Section: Electronics Posted: 11 Sep 2022 2:09 am Subject: Buffer and volume pedal compatibility
Dave Hepworth Replies: 13 Views: 3165	Thanks for all the replies.Could I ask you Brad....if I wanted to convert say a 500K pot to low impedance can it be done by putting a resistor in parallel to drop the value accordingly. Would it go be ...
Topic: Buffer and volume pedal compatibility
Dave Hepworth Replies: 13 Views: 3165	Forum Section: Electronics Posted: 10 Sep 2022 8:04 am Subject: Buffer and volume pedal compatibility
Dave Hepworth Replies: 13 Views: 3165	I replaced the pot with a 100k and it seems to have cured the taper issue going straight into amp ( buffered with the new Fender "set level and buffer" unit ) Also with the old pot by using ...
Topic: Buffer and volume pedal compatibility
Dave Hepworth Replies: 13 Views: 3165	Forum Section: Electronics Posted: 30 Aug 2022 3:08 pm Subject: Buffer and volume pedal compatibility
Dave Hepworth Replies: 13 Views: 3165	Hi Folks Could someone please explain why when I use a buffer between guitar and volume pedal then the taper is totally wrong .....most of the volume increase is at the end of the travel and unusabl ...
Topic: Tele volume pot value
Dave Hepworth Replies: 4 Views: 1489	Forum Section: Electronics Posted: 2 Jun 2022 1:00 am Subject: Tele volume pot value
Dave Hepworth Replies: 4 Views: 1489	Thanks for the replies guys.Much appreciated.
Topic: Tele volume pot value
Dave Hepworth Replies: 4 Views: 1489	Forum Section: Electronics Posted: 31 May 2022 4:53 am Subject: Tele volume pot value
Dave Hepworth Replies: 4 Views: 1489	Just fitted a 250K linear pot and the problem is resolved.Looks like a linear pot is the way forward.The volume now is very gradual and not lumpy at all.The original pot was wired correctly BTW.
Topic: Tele volume pot value
Dave Hepworth Replies: 4 Views: 1489	Forum Section: Electronics Posted: 25 May 2022 3:20 am Subject: Tele volume pot value
Dave Hepworth Replies: 4 Views: 1489	Hi Folks.I know this is not PSG and please delete if not allowed. I have a USA telecaster with a 250 k vol.pot and 250k no load to a grease bucket both pots are log. .The volume sweep is a bit lump ...
Topic: Sticker glue
Dave Hepworth Replies: 8 Views: 2442	Forum Section: Pedal Steel Posted: 24 May 2022 2:15 am Subject: Sticker glue
Dave Hepworth Replies: 8 Views: 2442	Hi Guys, Many thanks for your info on glue suitability.It will help me a lot.Looks like water based might be the way forward and repositional glue a close second.Regards Dave.
Topic: Sticker glue
Dave Hepworth Replies: 8 Views: 2442	Forum Section: Pedal Steel Posted: 19 May 2022 2:23 am Subject: Sticker glue
Dave Hepworth Replies: 8 Views: 2442	Hi Folks What is the best type of glue to put on a homemade sticker to enable it to adhere to a formica surface but yet be easy to remove if needed without leaving a glue mark or at least if it did ...