Search found 320 matches

Roger,
I had trigger finger happen to me after a work related incident. When I went to the surgeon, he suggested that I forcefully massage the tendon just below the knuckle multiple times a day. I ...

Does anyone by chance have this tabbed out? I have it close but not quite right.

Andy

I really needed to read this post today as I have been working on a passage from a George Strait song and man am I struggling to copy it but, in trying to I have gotten it close as well as learned a c ...

That is awesome! Joe really helped me out with my Tonex as well. He is quite the wizard and just a really great guy!

Howard,
I did it one night when my amp went belly up and I had the MB200 in my gig bag as a backup. Worked fine without a load.

mike bourke was live last night playing steel and tele. no knee levers but playing great.

Pretty amazing what he can do with just three pedals, isn't it? I watched a show where Mike was playing w ...

IIRC, Jim Cohen uses one for all of his fly dates for both tele/steel, he may be able to give you some insight/feedback. I tried one and didn't care for it so I sent it back.

I'd contact Patrick Timmins, patrick@tenstringsadmachine.com

I have went to using the Tonex for all of my in-ear gigs and have really come to like it a lot. I had some help from forum member Joe Rogers, as I couldn't get what I wanted out of the stock models. ...

I've seen a lot of chatter recently on the forum with folks using Kemper's. Just wondering if any others that haven't chimed in here are using Tonex now? How is it working for them? What profiles a ...

I am off this weekend and don't know of anyone playing to point you at. I do hope you find something/someone.

I really enjoyed those videos. Ty for taking the time to post and share them. Sounded great and looked like a great time!

I am now quite a few gigs into using the Tonex on most of my gigs and I have to say, I am very happy with it. I have some amp models/profiles from Joe Rogers, he is a forum member, that really work f ...

Mike Bourque is probably one of the best examples

https://www.youtube.com/watch?v=wL3NUSmcWQ0

You can find lots of him playing on AJ's Goodtime Bar YouTube channel.

The TONEX looks a good unit, but are there any high quality modern amplifier profiles which can be purchased ?

I am thinking the likes of Milkman, Little Walter 89, Quilter etc, not vintage amps li ...

I tried it and it wasn't for me, it is headed back.

Mine just arrived, #67. I'm hoping to try it out tonight.

I received mine and messed with it for a couple days but ended up returning it. I'm hoping the sess 400 I just ordered works out better for my need.

My specific goal for the sess 400 is to put it on my pedalboard and go ampless for the casino gigs that have their own sound engineer and we all use IEM's anyway. I tried the UA Dream65 for that purp ...

Thanks for the heads up Larry. I just ordered mine and will hope it gets here before my gig next weekend so I can take it for a test drive.

Andy

Boo, my whole band uses the Dream 65 for fly dates. I use one channel for steel and the other for Tele. Then we just get our sounds back in our wedges or IEMs. It saves on transporting amps and makes ...

Hi Marty!

Joe is still using his or was when I saw/talked to him in March although he doesn't use it for fly gigs, he was using something similar but smaller. Joe is a super great guy, I enjo ...

Dave,
I don't think you will be able to answer that question until you know what kind of dancers are following you. Are they a 2 step crowd? Are they doing partner pattern dances, cha cha, el paso, ...

I definitely think it is doable for anyone that wants to use a backline instrument or theirs doesn't arrive, or whatever else could happen. As a matter of fact, Mike Bourque talks about being able to ...

I found a mach3 head and combo in stock at a local music store. I took my steel over and tried it out, both the 12 inch combo and the head through a 15-inch cabinet that was on the floor.

I didn't ...

Author	Message
Topic: Trigger-finger!!!
Andy Vance Replies: 13 Views: 2076	Forum Section: Steel Players Posted: 14 Mar 2024 7:34 pm Subject: Trigger-finger!!!
Andy Vance Replies: 13 Views: 2076	Roger, I had trigger finger happen to me after a work related incident. When I went to the surgeon, he suggested that I forcefully massage the tendon just below the knuckle multiple times a day. I ...
Topic: Stay Out of my Arms - George Strait tab?
Andy Vance Replies: 0 Views: 735	Forum Section: Tablature Posted: 19 Feb 2024 11:41 am Subject: Stay Out of my Arms - George Strait tab?
Andy Vance Replies: 0 Views: 735	Does anyone by chance have this tabbed out? I have it close but not quite right. Andy
Topic: Gary Carter's 'Cold, Cold Heart'
Andy Vance Replies: 20 Views: 3723	Forum Section: Tablature Posted: 11 Feb 2024 10:18 am Subject: Gary Carter's 'Cold, Cold Heart'
Andy Vance Replies: 20 Views: 3723	I really needed to read this post today as I have been working on a passage from a George Strait song and man am I struggling to copy it but, in trying to I have gotten it close as well as learned a c ...
Topic: ToneX pedal
Andy Vance Replies: 1 Views: 760	Forum Section: Electronics Posted: 18 Dec 2023 12:04 pm Subject: ToneX pedal
Andy Vance Replies: 1 Views: 760	That is awesome! Joe really helped me out with my Tonex as well. He is quite the wizard and just a really great guy!
Topic: G-K MB 200 Sans Cabinet?
Andy Vance Replies: 5 Views: 1078	Forum Section: Electronics Posted: 16 Dec 2023 11:24 am Subject: G-K MB 200 Sans Cabinet?
Andy Vance Replies: 5 Views: 1078	Howard, I did it one night when my amp went belly up and I had the MB200 in my gig bag as a backup. Worked fine without a load.
Topic: Yes, There Is Country Music In Nashville!
Andy Vance Replies: 13 Views: 4517	Forum Section: Steel on the Web Posted: 16 Dec 2023 11:19 am Subject: Yes, There Is Country Music In Nashville!
Andy Vance Replies: 13 Views: 4517	mike bourke was live last night playing steel and tele. no knee levers but playing great. Pretty amazing what he can do with just three pedals, isn't it? I watched a show where Mike was playing w ...
Topic: UAFX Dream ‘65
Andy Vance Replies: 10 Views: 2943	Forum Section: Electronics Posted: 7 Dec 2023 9:19 pm Subject: UAFX Dream ‘65
Andy Vance Replies: 10 Views: 2943	IIRC, Jim Cohen uses one for all of his fly dates for both tele/steel, he may be able to give you some insight/feedback. I tried one and didn't care for it so I sent it back.
Topic: Pedal steel repair in Seattle area
Andy Vance Replies: 4 Views: 1385	Forum Section: Pedal Steel Posted: 5 Dec 2023 8:16 pm Subject: Pedal steel repair in Seattle area
Andy Vance Replies: 4 Views: 1385	I'd contact Patrick Timmins, patrick@tenstringsadmachine.com
Topic: Tube Amps vs Modelers
Andy Vance Replies: 47 Views: 50890	Forum Section: Electronics Posted: 30 Nov 2023 7:41 pm Subject: Tube Amps vs Modelers
Andy Vance Replies: 47 Views: 50890	I have went to using the Tonex for all of my in-ear gigs and have really come to like it a lot. I had some help from forum member Joe Rogers, as I couldn't get what I wanted out of the stock models. ...
Topic: Tone X Pedal
Andy Vance Replies: 39 Views: 16260	Forum Section: Electronics Posted: 10 Nov 2023 11:35 am Subject: Tone X Pedal
Andy Vance Replies: 39 Views: 16260	I've seen a lot of chatter recently on the forum with folks using Kemper's. Just wondering if any others that haven't chimed in here are using Tonex now? How is it working for them? What profiles a ...
Topic: Anybody Playing In Seattle Friday Night?
Andy Vance Replies: 1 Views: 2407	Forum Section: Steel Players Posted: 31 Oct 2023 7:45 pm Subject: Anybody Playing In Seattle Friday Night?
Andy Vance Replies: 1 Views: 2407	I am off this weekend and don't know of anyone playing to point you at. I do hope you find something/someone.
Topic: Playing with Redd Volkaert at the MN State Fair
Andy Vance Replies: 13 Views: 4864	Forum Section: Steel on the Web Posted: 27 Oct 2023 11:46 am Subject: Playing with Redd Volkaert at the MN State Fair
Andy Vance Replies: 13 Views: 4864	I really enjoyed those videos. Ty for taking the time to post and share them. Sounded great and looked like a great time!
Topic: Tone X Pedal
Andy Vance Replies: 39 Views: 16260	Forum Section: Electronics Posted: 17 Sep 2023 10:54 am Subject: Tone X Pedal
Andy Vance Replies: 39 Views: 16260	I am now quite a few gigs into using the Tonex on most of my gigs and I have to say, I am very happy with it. I have some amp models/profiles from Joe Rogers, he is a forum member, that really work f ...
Topic: PSG players using a flat pick?
Andy Vance Replies: 14 Views: 2024	Forum Section: Steel Players Posted: 30 Aug 2023 5:35 pm Subject: PSG players using a flat pick?
Andy Vance Replies: 14 Views: 2024	Mike Bourque is probably one of the best examples https://www.youtube.com/watch?v=wL3NUSmcWQ0 You can find lots of him playing on AJ's Goodtime Bar YouTube channel.
Topic: Tone X Pedal
Andy Vance Replies: 39 Views: 16260	Forum Section: Electronics Posted: 29 Aug 2023 6:51 pm Subject: Re: Tonex modern profiles
Andy Vance Replies: 39 Views: 16260	The TONEX looks a good unit, but are there any high quality modern amplifier profiles which can be purchased ? I am thinking the likes of Milkman, Little Walter 89, Quilter etc, not vintage amps li ...
Topic: Sesh 400 I have #64
Andy Vance Replies: 30 Views: 9222	Forum Section: Electronics Posted: 24 Jul 2023 2:59 pm Subject: Sesh 400 I have #64
Andy Vance Replies: 30 Views: 9222	I tried it and it wasn't for me, it is headed back.
Topic: Sesh 400 I have #64
Andy Vance Replies: 30 Views: 9222	Forum Section: Electronics Posted: 22 Jul 2023 10:52 am Subject: Sesh 400 I have #64
Andy Vance Replies: 30 Views: 9222	Mine just arrived, #67. I'm hoping to try it out tonight.
Topic: UA Dream ‘65
Andy Vance Replies: 23 Views: 7190	Forum Section: Electronics Posted: 15 Jul 2023 8:55 am Subject: UA Dream ‘65
Andy Vance Replies: 23 Views: 7190	I received mine and messed with it for a couple days but ended up returning it. I'm hoping the sess 400 I just ordered works out better for my need.
Topic: TC Furlong Sesh 400 stomp box
Andy Vance Replies: 128 Views: 65061	Forum Section: Electronics Posted: 14 Jul 2023 9:08 am Subject: TC Furlong Sesh 400 stomp box
Andy Vance Replies: 128 Views: 65061	My specific goal for the sess 400 is to put it on my pedalboard and go ampless for the casino gigs that have their own sound engineer and we all use IEM's anyway. I tried the UA Dream65 for that purp ...
Topic: TC Furlong Sesh 400 stomp box
Andy Vance Replies: 128 Views: 65061	Forum Section: Electronics Posted: 13 Jul 2023 9:42 pm Subject: TC Furlong Sesh 400 stomp box
Andy Vance Replies: 128 Views: 65061	Thanks for the heads up Larry. I just ordered mine and will hope it gets here before my gig next weekend so I can take it for a test drive. Andy
Topic: UA Dream ‘65
Andy Vance Replies: 23 Views: 7190	Forum Section: Electronics Posted: 5 Jul 2023 1:41 pm Subject: UA Dream ‘65
Andy Vance Replies: 23 Views: 7190	Boo, my whole band uses the Dream 65 for fly dates. I use one channel for steel and the other for Tele. Then we just get our sounds back in our wedges or IEMs. It saves on transporting amps and makes ...
Topic: Quad Cortext
Andy Vance Replies: 9 Views: 1481	Forum Section: Electronics Posted: 19 Jun 2023 6:11 pm Subject: Quad Cortext
Andy Vance Replies: 9 Views: 1481	Hi Marty! Joe is still using his or was when I saw/talked to him in March although he doesn't use it for fly gigs, he was using something similar but smaller. Joe is a super great guy, I enjo ...
Topic: dancing tunes
Andy Vance Replies: 5 Views: 1379	Forum Section: Steel Players Posted: 4 Feb 2023 8:18 am Subject: dancing tunes
Andy Vance Replies: 5 Views: 1379	Dave, I don't think you will be able to answer that question until you know what kind of dancers are following you. Are they a 2 step crowd? Are they doing partner pattern dances, cha cha, el paso, ...
Topic: Back line guitar and accessories
Andy Vance Replies: 12 Views: 2545	Forum Section: Pedal Steel Posted: 11 Jan 2023 10:01 pm Subject: Back line guitar and accessories
Andy Vance Replies: 12 Views: 2545	I definitely think it is doable for anyone that wants to use a backline instrument or theirs doesn't arrive, or whatever else could happen. As a matter of fact, Mike Bourque talks about being able to ...
Topic: edit
Andy Vance Replies: 39 Views: 7784	Forum Section: Electronics Posted: 30 Dec 2022 5:21 pm Subject: edit
Andy Vance Replies: 39 Views: 7784	I found a mach3 head and combo in stock at a local music store. I took my steel over and tried it out, both the 12 inch combo and the head through a 15-inch cabinet that was on the floor. I didn't ...